期刊文献+

共缩聚法制备功能化P(St-MPS)/MCM-41核壳复合微球 被引量:1

Synthesis of Functionalized P(St-MPS)/MCM-41 Core-shell Composite Microspheres by Co-condensation Synthesis Method
下载PDF
导出
摘要 以聚(苯乙烯-γ-甲基丙烯酰氧基丙基三甲氧基硅烷)(P(St-MPS))微球为核模版,十六烷基三甲基溴化铵为壳模版,以P(St-MPS)微球、正硅酸乙酯与MPS的混合物为硅源,直接在无皂乳液中通过共缩聚方法合成表面链有碳—碳双键功能基的P(St-MPS)/MCM-41核壳复合微球;采用TEM,XRD和FT-IR对产物进行了表征。结果表明,表面功能化的P(St-MPS)/MCM-41核壳复合微球可以直接在无皂乳液中一步合成,所制备的核壳复合微球粒径约为260 nm,壳层约为10 nm。 Poly(styrene-γ-methacrylic propyl trimethoxysilane)/MCM-41 [P(St-MPS)/MCM-41] core-shell composite microspheres functionalized by Carbon-carbon double bond group were directly obtained by co-condensation synthesis method in soap-free emulsion using cetyltrimethyl ammonium bromide and P(St-MPS) microspheres as co-templates,P(St-MPS) microspheres,tetraethyl orthosilicate and MPS as silica source.The synthesized samples were characterized by XRD,TEM and FT-IR.The results show that functionalized P(St-MPS)/MCM-41 core-shell composite microspheres are synthesized by one step directly in soap-free emulsion.The diameter of the functionalized P(St-MPS)/MCM-41 core-shell composite microspheres and the thickness of the shell were about 260 nm and 10 nm,respectively.
出处 《微细加工技术》 2008年第6期34-36,共3页 Microfabrication Technology
基金 国家自然科学基金资助项目(50573053) 山西省青年基金资助项目(20051007)
关键词 共缩聚法 聚(苯乙烯-γ-甲基丙烯酰氧基丙基三甲氧基硅烷) MCM-41 核壳复合微球 功能化 co-condensation synthesis method poly(styrene-γ-methacrylic propyl trimethoxysilane) MCM-41 core-shell composite microspheres functionalization
  • 相关文献

参考文献4

二级参考文献59

  • 1巩雁军,李志宏,吴东,孙予罕,邓风,罗晴,岳勇.甲基官能化硅基MCM-41和MSU-X的合成研究[J].燃料化学学报,2001,29(z1):36-39. 被引量:4
  • 2侯经国,田锐,马骞,杜新贞,高锦章.MCM-41介孔分子筛的烷基化修饰[J].西北师范大学学报(自然科学版),2004,40(4):58-60. 被引量:4
  • 3Bourgeat-Lami E, Lang J. Encapsulation of Inorganic Particles by Dispersion Polymerization in Polar Media: 2 Effect of Slica Size and Concentration on the Morphology of Silica-Polystyrene Composite Paxticles. J Colloid Interface Sci, 1999,210:281 - 289.
  • 4Espiard P H,Guyot A. Poly( Ethyl Acrylate)Latexes Encapsulating Nanoparticles of Silica: 2 Grafting Process onto Silica. Polymer,1995,36(23) :4 391 -4 395.
  • 5Carrot G, Diamanti S, Manuszak M, et al. Atom Transfer Radical Polymerization of n-Butyl Acrylate from Silica Nanoparticles. J Polym Sci Part A :Polym Chem,2001,39( 24 ) :4 294 -4 301.
  • 6Wang Yong, Teng Xiaowei,Wang Jinshan, et al. Solvent-Free Atom Transfer Radical Polymerization in the Synthesis of Fe203 @ Polystyrene Core-Shell Nanoparticles. Nano Lett, 2003,3 ( 6 ) :789 - 793.
  • 7von Werne T,Patten T E. Preparation of Structurally Well-Defined Polymer-Nanoparticle Hybrids with Controlled/Living Radical Polymerizations. J Am Chem Soc, 1999,121,7 409 - 7 410.
  • 8von Weme T, Patten T E. Atom Transfer Radical Polymerization from Nanoparticles: A Tool for the Preparation of Well-Defined Hybrid Nanostructures and for Understanding the Chemistry of Controlled/" Living" Radical Polymerizations from Surfaces. J Am Chem Soc ,2001,123:7 497 - 7 505.
  • 9von Weme T, Patten T E. Synthesis of Well-Defined, Polymer Grafted Silica Particles by Aqueous ATRP. Langmuir,2001,17 :4 479 -4 481.
  • 10Chen Xianyi, Randall D P, Perruchot C, et al. Synthesis and Aqueous Solution Properties of Polyelectrolyte-Grafted Silica Particles Prepared by Surface-Initiated Atom Transfer Radical Polymerization. J Colloid Interface Sci,2003,257:56 - 64.

共引文献84

同被引文献8

  • 1YANG H,ZHANG Q,GUO M,et.al.Study on the phase structures and toughening mechanism in PP/EPDM/SiO2 ternary composites[J].Polymer,2006,47(6):2106-2115.
  • 2MATONIS V A,SMALL N C.A macroscopic analysis of composites containing layered spherical inclusions[J].Polymer Engineering and Science,1969,9(2):90-99.
  • 3ZHAO Y S,WANG H,LIU Y M,et al.Hollow MCM-41 microspheres derived from P(St-MMA)/MCM-41 core/shell composite particles[J].Materials letters,2008,62(27):4254-4256.
  • 4ZHAO Y S,CHEN K,LIU Y M,et al.A facile method to synthesize hollow MCM-41 microspheres via P(St-MPS)/MCM-41 core/shell composite microspheres[J].Chemistry Letters,2009,38(1):66-67.
  • 5JONES A T,AIZLEWOOD J M,BECKETT D R.Crystalline forms of isotactic polypropylene[J].Die Makromolekulare Chemie,1964,75(1):134-158.
  • 6RAAB M,KOTEK J,BALDRIAN J.Toughness profile in injection-molded polypropylene:the effect of the β-modification[J].Applied Polymer Science,1998,69 (11):2255-2259.
  • 7YEE A F,PEARSON R A.Toughening mechanisms in elastomer-modified epoxies:part 1 mechanical studies[J].Journal of Materials Science,1986,21(7):2462-2474.
  • 8孟季茹,梁国正,秦华宇,赵磊.刚性粒子增韧增强聚合物的研究概况[J].塑料,2002,31(2):47-50. 被引量:26

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部