期刊文献+

Estimation of plasma parameters in the process of micro-scale powder plastic and characteristics of its products 被引量:1

Estimation of plasma parameters in the process of micro-scale powder plastic and characteristics of its products
下载PDF
导出
摘要 The temperature and density of plasma jets were estimated with a Boltzmann plot and Stark broadening of Ar I(696.54 nm) lines by optical emission spectroscopy(OES) in the process of plasma plastic, and the morphology and microstructure of tungsten(W) powders were investigated by scanning electron microscope(SEM) and x-ray Diffraction(XRD), respectively.The results show that the assumption of local thermodynamic equilibrium(LTE) was invalid at the end of the plasma jets, and earlier than this after the injection of tungsten powder. The temperature and electron density of the plasma jets were up to about T?=?6797 K with Qc?=?50 slpm and ne?=?1.05?×?1016 cm-3 with Qs?=?115 slpm at Z?=?60 mm, respectively, and both dropped rapidly with the injected tungsten powders of 20 μm. After the plasma plastic process,the spherical tungsten powders were prepared and there were some satellite particles on the surface of the spherical products. The tungsten powders were both composed of a single equilibrium α-W phase with a body centered cubic(bbc) crystal structure before and after plasma treatment. The temperature and density of plasma jets were estimated with a Boltzmann plot and Stark broadening of Ar I(696.54 nm) lines by optical emission spectroscopy(OES) in the process of plasma plastic, and the morphology and microstructure of tungsten(W) powders were investigated by scanning electron microscope(SEM) and x-ray Diffraction(XRD), respectively.The results show that the assumption of local thermodynamic equilibrium(LTE) was invalid at the end of the plasma jets, and earlier than this after the injection of tungsten powder. The temperature and electron density of the plasma jets were up to about T?=?6797 K with Qc?=?50 slpm and ne?=?1.05?×?1016 cm-3 with Qs?=?115 slpm at Z?=?60 mm, respectively, and both dropped rapidly with the injected tungsten powders of 20 μm. After the plasma plastic process,the spherical tungsten powders were prepared and there were some satellite particles on the surface of the spherical products. The tungsten powders were both composed of a single equilibrium α-W phase with a body centered cubic(bbc) crystal structure before and after plasma treatment.
作者 陈伦江 陈文波 刘川东 童洪辉 赵青 Lunjiang CHEN;Wenbo CHEN;Chuandong LIU;Honghui TONG;Qing ZHAO
出处 《Plasma Science and Technology》 SCIE EI CAS CSCD 2019年第7期54-59,共6页 等离子体科学和技术(英文版)
基金 supported by National Natural Science Foundation of China (Nos. 11805058, 11535003) Sichuan Science and Technology Program (No. 19ZDYF0012)
关键词 plasma temperature ELECTRON density POWDER PLASTIC OES BOLTZMANN plasma temperature electron density powder plastic OES Boltzmann
  • 相关文献

同被引文献25

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部