摘要
在模具成型件的检测中,常常需要分析从成型件上测得的批量点与原设计模型间的偏差值,从而来判断产品是否合格。而Pro/E系统只提供单个点的测量分析工具,测量效率低且容易遗漏待测点。经过对Pro/E系统中测量工具局限性的研究,通过Pro/E自带的二次开发工具Pro/Toolkit,使用MFC可视对话框技术,编写Visual C++程序,开发出集成化的分析测量工具。能够根据允许公差值,快速、准确地判断成型件是否符合要求。使得成品的测量分析效率提高,并且缩短了零部件产品的检验周期。
During the detection of molding parts,we often need to analyse deviation between the mass points measured on the molding and the original design model,According to the result,we can determine whether the product is qualified.The Pro/E system only allows a single point to measure and analysis.By this way,It is slow to measure mass points,and it is easy to miss the measured points.This paper analyzes the limitations of present measurement tools.By development tool Pro/Toolkit,applying MFC visual dialog technology,and writing Visual C++ program.We develop an integrated tool of analysis and measurement.According to the values of allowable tolerance,it can rapidly and accurately determines whether the machined parts meet the production requirements.It improves the efficiency of analysis and measurement,and shortens the inspection cycle of parts.
出处
《电脑知识与技术(过刊)》
2017年第9X期207-209,共3页
Computer Knowledge and Technology