摘要
针对AHB-PCI的桥接电路,搭建了一个测试其功能的平台。该平台主要由软件和硬件协同完成。硬件部分实现了两个符合AHB标准的RAM,一个作为主机,能够请求总线;另一个作为从机,可以接收数据。软件方面通过驱动程序对PCI部分进行相应配置和读写。通过实际测试比较,使用该方法搭建的平台比在modelsim上的仿真验证平台在正确性验证上更有保障。
According to AHB- PCI bridge circuits, builted a platform to test its functionality. The platform was based on hardware /software codesign. Hardware consists of two- AHB standard RAM, one as the master to request bus, another as the slave to receive data. Software through the driver to configure the PCI, read and write. Through testing, platform was builted using this method of simulation platform than on the modelsim more secure in the verification correct.
出处
《电子技术应用》
北大核心
2016年第10期40-43,共4页
Application of Electronic Technique
基金
国家自然科学基金重点资助项目(61136002)
教育部科学研究计划重点资助项目(2111180)
关键词
AHB
PCI
软硬协同
验证平台
AHB
PCI
hardware / software codesign
verification platform
