基于PLC的过程控制系统设计与实现

笔者通过本文对基于PLC的过程控制系统设计与实现的可能性表达了自己的看法。上位机使用组态王6.0来成功实现SCADA的功能,而下位机则是使用了OMRONPLC技术来成功的对于现场所包含的相关数据进行精确地的收集、以及后期处理工作并且对去进行一定程度的操控。而上、下两位机之间则是使用RS232的串口来进行连接并且进行信息交互。从实验的结果我们可以看出:该系统已经成功达到了我们的预期目标。

PC using the configuration 6.0 SCADA functionality to achieve success, and the next bit machine is used OMRONPLC technology to successful site for relevant data are contained in the col ection of accurate and post-processing work and to go to a certain degree of manipulation. And on between the two machines is the use of lower RS232 serial port for connection and information exchange.