摘要
高压断路器进行型式试验时,由于电动力、断路器合闸时的振动、导轨和断路器变形等外界原因,而造成的一次触头接触不好,引起燃弧而导致开断试验失败。本文旨在通过试验确立静态和动态条件下动静触头对中度,解决由于动静触头震动而引发的型式试验失败。
When high voltage circuit breaker type testing, electrical power due to external reasons, vibration breaker closing time, the deformation of the rail and circuit breakers, etc., caused by a bad contact in contact, causing arcing caused by breaking test failed. This paper aims to test under static and dynamic conditions established contacts with moderate movement, because the movement to solve the vibration caused by contact type test failed.
出处
《电子制作》
2014年第9X期246-247,共2页
Practical Electronics
关键词
震动
动静触头对中度
触头
Vibration
static and dynamic contact with moderate
contacts
