摘要
通过烧结试验考察了烧结温度与Fe Ni Mn Mo系部分预合金粉氧含量的关系。采用无齿、低齿和高齿的 3种预成形坯 ,进行了转换器齿环的粉末热锻试验 ,探讨了相关的工艺问题。
The relation between sintering temperature and oxygen content of Fe\|Ni\|Mn\|Mo partly pre\|alloyed powder is inspected. A series of hot powder forging tests of converter spline is carried out based on three kinds of the shape of preform including no teeth, low teeth and high teeth. The relative technical problems and difficulties, as well as corresponding measures are discussed.
出处
《锻压技术》
CAS
CSCD
北大核心
2002年第5期42-45,共4页
Forging & Stamping Technology
基金
上海汽车工业科技发展基金资助项目 (2 1 95A)
关键词
汽车
粉末热锻
转换器齿环
烧结温度
Hot powder forging Converter spline Sintering temperature