期刊文献+

机械合金化法制备Al-Ni-La-Cu非晶合金 被引量:1

Al-Ni-La-Cu Amorphous Alloy Prepared by Mechanical Alloying
下载PDF
导出
摘要 用机械合金化法制备了不同成份的 Al- Ni- L a- Cu非晶合金 .经 X射线衍射仪、透射电子显微术和示差扫描量热仪 (DSC)热分析研究表明 ,随着合金中 Cu含量的增加 ,Al- Ni- L a- Cu的非晶形成能力逐渐增强 ,晶化温度逐渐降低 . A morphous powder of Al rich Al Ni La Cu alloy was prepared by mechanical alloying. The alloy was studied with X ray diffraction, transmission electron microscopy and differential scanning calorimetry. As a result, with the amount of copper increasing, the glass forming ability of Al Ni La Cu alloy is gradually increased, but the crystalline temperature is gradually decreased.
出处 《上海大学学报(自然科学版)》 CAS CSCD 2002年第5期420-422,共3页 Journal of Shanghai University:Natural Science Edition
基金 国家自然科学基金 (5 99710 2 8) 国家重点自然基金 (5 0 0 3 10 10 )资助项目
  • 相关文献

参考文献7

  • 1Koch C C, Cavin O B, McKamey C G, et al. Preparation of amorphous Ni60Nb40 by mechanical alloying [J]. Appl Phys Lett, 1983, 43:1017.
  • 2Eckert J, Seidel M, Schultz J. Formation of amorphous alloys with significant supercooled liquid region by mechanical alloying [J]. J Non-Crystalline Solids, 1996, 205-207:500.
  • 3Inoue A, Masumoto T. Proc of 7th int conf on rapidly quenched mater[C]. Amsterdam:Elsevier, 1990.1125.
  • 4Kato H, Kawamura Y, Inoue A. High tensile strength bulk glassy alloy Zr65Al10Ni10Cu15 prepared by extrusion of atomized glassy powder [J]. Mater Trans, JIM 1996, 37:70.
  • 5Inoue A, Ohtera K, Tsai A P, et al. New amorphous alloys with good ductility in Al-Y-M and Al-La-M (M=Fe, Co, Ni or Cu) systems [J]. Jpn J Appl Phys 1988,27:L280.
  • 6Inoue A. Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems [J]. Progress in Materials Science 1998, 43:365.
  • 7Greer A L. Confusion by design [J]. Nature, 1993, 366:303.

同被引文献19

  • 1Klement W,Willens R H,Duwez P.Non-crystalline Structure in Solidified Gold-silicon Alloys.Nature,1960,187(4740):869~873
  • 2Inoue A,Kohinata M,Tsai A P.Mg-Ni-La Amorpous Alloys with a Wide Supercooled Liquid Region.Mater.Trans.JIM,1989,30:378~382
  • 3Inoue A,Zhang T,Masumoto T.Glass-forming Ability of Alloys.J.Non-cryst.Solids,1993(156~158):473~480
  • 4Yokoyama Y,Inoue A.Solidification Condition of Bulk Glassy Zr60 Al10Ni10Cu15Pb5 Alloy by Unidirectional Arc Melting.Mater.Trans.JIM,1995,36:1 398~1 401
  • 5Paker A,Johnson W L.A Highly Processable Metallic Glass:Zr41.2Ti13.8Cu12.5Ni10.0Be22.5.Appl.Phys.Lett.,1993,63:2 342~2 344
  • 6Inoue A,Nishiyama N,Amiya K et al.Ti-based Amorphous Alloys with a Wide Supercooled Liquid Region.Mater.Lett.,1994,19:131~135
  • 7Inoue A,Gook J S.Fe-based Ferromagnetic Glassy Alloys with Wide Supercooled Liquid Region.Mater.Trans.JIM,1995,36:1 180~1 183
  • 8Inoue A,Katuya A.Multicomponent Co-based Amorphous Alloys with Wide Supercooled Liquid Region.Mater.Trans.JIM,1996,37:1 332~1 336
  • 9Wang X M,Yoshii I,Inoue A.Bulk Amorphous Co-Ni-Based Alloys with a Large Supercooled Liquid Region.Mater.Trans.JIM,2000,41:539~546
  • 10Lin X H,Johnson W L.Formation of Ti-Zr-Cu-Ni Bulk Metallic Glasses.J.Appl.Phys.,1995,78(11):6 514~6 519

引证文献1

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部