摘要
阐述了某全密度聚乙烯装置采用气相流化床生产工艺,生产4L纯净水聚乙烯薄膜专用树脂,牌号为DMDH 6400。该产品的熔体流动速率(I_(21.6))为58~62g/10min,密度大于或等于0.958 g/cm^3,拉伸屈服应力不小于21MPa,拉伸断裂应力不小于7MPa,断裂标称应变大于或等于350%。经加工使用,制品的气味试验、耐跌落性能、耐压试验、砂眼检测等技术指标均满足要求,产品质量与国外相同牌号产品相当。
A FDPE plant uses gas phase fluidized bed production process for production of a resin specially used for 4 L purified water PE film, its grade is DMDH 6400. This product’s melt flow rate is 58~62 g/10 min, density is equal than 0.958 g/cm3,tensile yield stress is no less than 21 MPa, tensile stress at break is no less than 7 MPa, nominal strain at break is 350%. Through processing and application, all its technical specifications, such as the odor test, drop resistance performance, pressure test, fish-eye detection meet requirement, and product quality is equivalent to those of the same grade.
作者
王景良
Wang Jingliang(Plastics Plant of Daqing Petrochemical Company, Daqing 163714, China)
出处
《炼油与化工》
2016年第6期26-27,共2页
Refining And Chemical Industry