期刊文献+

简析240米钢内筒烟囱液压顶升设备液压系统 被引量:1

Brief Analysis on the Hydraulic System for Hydraulic Lifting Equipment in 240 m Steel Inner Cylindrical Chimney
原文传递
导出
摘要 钢内筒烟囱的应用有助于提升火力发电效率。以240米钢内筒烟囱液压顶升设备为研究对象,对液压系统进行了简要分析。该液压系统从仿生学角度出发,由电气控制系统、构架和插销组成,分别充当机器人的大脑、骨架和关节。主液压系统和辅助液压系统相互联动,提高了设备稳定性和可靠性;智能控制系统有助于保护设备精度和操作人员安全。系统的实用价值得到了验证,对于摆脱技术依赖、节约研发经费等具有现实意义。 The application of the steel inner cylindrical chimney is helpful to improve the efficiency ofthermal power generation.The hydraulic system for hydraulic lifting equipment of240m steel innercylindrical chimney is briefly analyzed.Such a hydraulic system is designed from the view of bionics,and its composition such as electrical control system,structure and bolt,are respectively acted as brain,skeleton and joint of a robot.The main hydraulic system and auxiliary hydraulic system cooperate witheach other,and greatly improve the stability and reliability of the equipment;intelligent control systemensures the accuracy and operation safety of the equipment.The practical value of such a hydraulic systemhas been verified,which is of practical significance to break away from technological dependence on thedeveloped countries,reduce the cost of technology and develop the industrial economy.
作者 李日森 LI Ri-sen(Hubei University of Technology, Wuhan, Hubei, 430068, China)
机构地区 湖北工业大学
出处 《工业技术创新》 2016年第6期1097-1100,共4页 Industrial Technology Innovation
关键词 钢内筒烟囱 液压顶升设备 液压系统 智能控制 仿生学 Steel Inner Cylindrical Chimney Hydraulic Lifting Equipment Hydraulic System Intelligent Control Bionics
  • 相关文献

参考文献3

二级参考文献7

  • 1贡金鑫.结构可靠指标求解的一种新的迭代方法[J].计算结构力学及其应用,1995,12(3):369-373. 被引量:37
  • 2许林 程耿东 等.可靠度分析方法及其在ANSYS的接口处理问题.大型复杂结构的关键科学问题和设计理论研究(1999)[M].大连:大连理工大学出版社,2000,4..
  • 3-.北良港60万t筒仓32m直径顶盖工程加固建议[M].大连:大连理工大学工程力学系,1999,7..
  • 4[2]Liliana Beldie Goran Sandberg and Lars Sandberg Paperboard Packages Exposed to Static Loads-finite Elemnet Modelling and Experinents[J]. Packaging Technology and Science, 2001,(14):171-178.
  • 5[3]Tsutomu Noguchi ,Mayumi Miyashita ,Junetsu Seto,MasaruTan and Mitoshi Kawano Development of Moulded Pulp Materials for the Packaging of Electronic Equipment[J].Packaging Technology and Science,1997,(10):161-168.
  • 6程耿东 李刚 等.基于可靠度的抗震结构优化设计.抗震结构的最优设防烈度与可靠度(第二部分)[M].北京:科学出版社,1999..
  • 7程耿东,李刚.基于功能的结构抗震设计中一些问题的探讨[J].建筑结构学报,2000,21(1):5-11. 被引量:103

共引文献49

同被引文献2

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部