期刊文献+

呋喃树脂砂强度影响因素研究 被引量:9

Study to the influential factors of furan resin sand strength
下载PDF
导出
摘要 通过对影响自硬呋喃树脂砂强度的研究,对影响树脂砂强度的主要因素进行了总结。认为树脂加入量超过1.7%时,树脂砂强度将降低;固化剂加入量也应根据砂温和对砂型硬化速度的不同要求而不同,一般控制在38%~55%之间为宜;随着季节的不同,必须严格控制好砂温。 Study on the effect of the strength of self hardening furan resin sand,The main factors affectingthe strength of resin sand are summarized,That the amount of resin to add more than1.7%,Resin sand strengthwill be reduced,The curing agent should be according to the different requirements of the sand and sand hardeningspeed and different,General control in38%~55%between the appropriate;with the different seasons,must bestrictly controlled sand temperature.
作者 樊武明 史国庆 严江波 杨霄峰 SHI GuoQing;FAN WuMing;Yan JiangBo;Yang XiaoFeng(Shaanxi diesel engine heavy industry Co., Ltd.,Xingping 713100,Shaanxi,China)
出处 《中国铸造装备与技术》 CAS 2017年第1期20-22,共3页 China Foundry Machinery & Technology
关键词 树脂砂强度 树脂加入量 固化剂加入量 砂温 紧实度 微粉含量 含水量 furan resin sand strength amount of resin amount of curing agent sandtemperature compactness powder content water content
  • 相关文献

参考文献3

二级参考文献19

  • 1米国发,王宏伟,曾松岩.冷硬树脂砂性能及其影响因素研究[J].航天制造技术,2004(6):8-11. 被引量:4
  • 2刘敏歆,赵立信.三种不同类型树脂砂的高温力学性能[J].中国铸机,1994(3):38-41. 被引量:2
  • 3冯胜山.冷壳型铸造工艺的研究[M].武汉:华中理工大学,1988..
  • 4沈其文.化学粘结剂砂的发展[J].铸造技术,1986,(4):47-50.
  • 5儒科夫斯基C C 焦明山译.冷硬砂铸型及型芯[M].北京:国防工业出版社,1985..
  • 6山本治 朱嘉溶(译).有机铸型的热强度[J].国外造型材料,1982,(1):41-45.
  • 7孟爽芬.自硬树脂砂高温强度的研究[J].铸造工程,1982,(3):10-16.
  • 8冯胜山.原砂对冷硬树脂砂力学性能的影响[J].造型材料,1994,(4):33-37.
  • 9王文清.SO2吹气冷芯盒法制芯的研究[J].华中工学院学报,1985,(1):1-7.
  • 10黄斌,铸造,1997年,46卷,2期,36页

共引文献14

同被引文献35

引证文献9

二级引证文献21

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部