摘要
文章以一个小型吸波箱为研究对象,采用TD软件对吸波箱的温度与其内部放置的天线表面热流均匀性之间的关系进行了仿真分析,依据仿真结果设计吸波箱的控温回路和控温策略,最后通过模拟试验对吸波箱的控温效果进行验证。试验证明通过对吸波箱进行合理控温能够将天线表面热流的不均匀度控制在5%以内。
This paper studies a small microwave absorbing box,using the TD software to simulate thetemperature of the box and the heat flux uniformity of the antenna,and based on the results of the simulation,thetemperature control circuit and strategy are designed.The temperature control capability of the box is validatedthrough the simulation test which shows that by controlling the temperature of the microwave absorbing boxreasonably,the heat flux uniformity can be kept within5%.
作者
秦家勇
柳晓宁
刘畅
王晶
林博颖
QIN Jiayong;LIU Xiaoning;LIU Chang;WANG Jing;LIN Boying(Beijing Institute of Spacecraft Environment Engineering, Beijing 100094, China)
出处
《航天器环境工程》
2017年第1期56-62,共7页
Spacecraft Environment Engineering
关键词
真空热试验
吸波箱
控温
温度均匀性
vacuum thermal test
microwave absorbing box
temperature-control
temperature uniformity
