摘要
以82B盘条的连铸生产为研究对象,采用ProCast商业软件根据实际生产的工艺参数建立铸坯的凝固传热模型,并利用射钉试验对模型进行校正以提高模型的准确性。在末搅位置无法前移的前提下,将拉速由1.2 m/min提高到1.4 m/min,铸坯中心C偏析由1.33降低至1.10。
In combination with the actual situation of82B wire rod of a billet continuous caster,a mathematical model was established to investigate the solidification and heat transfer using ProCast package,which was validated by comparing the shell thickness achieved by the nail shooting experiment to improve the accuracy of the mathematical model.According to the experimental results,casting speed was changed from1.2m/min to1.4m/min because of the fixed position of F-EMS.Then central carbon segregation was reduced from1.33to1.10.
作者
张卫华
王东兴
左小坦
李京社
杨树峰
高维
ZHANG Weihua;WANG Dongxing;ZUO Xiaotan;LI Jingshe;YANG Shufeng;GAO Wei(School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;Wuhu Xinxing Ductile Iron Pipes Co. Ltd., Wuhu 241002, China)
出处
《工业加热》
CAS
2017年第1期35-37,46,共4页
Industrial Heating
关键词
连铸
射钉法
数值模拟
拉速
continuous casting
nail shooting
numerical simulation
casting speed