摘要
可控震源以其施工高效、清洁环保等优点,得到越来越广泛的应用,但是,可控震源谐振对资料的影响一直没有得到较好的解决。谐振的产生主要与可控震源自身设备、施工地表和可控震源的施工参数有关,但前两种因素不好改变,因此,本文主要分析可控震源不同的施工参数对谐振的影响,通过对施工参数的改善,达到减小谐振影响的目的。
Vibroseis featuring high efficiency,clean and environmentally friendly,has been widely used.However,the influence of vibroseis on the data has not been eliminated.Resonance is induced by construction ground,equipment and construction parameters of vibroseis,while it is difficult to alter the former two factors;therefore,this paper describes the influence of different construction parameters on the resonance and modify the construction parameters to reduce the effect of the resonance.
作者
孙跃龙
Sun Yuelong(Shengli Branch,Geophysical Co.,SINOPEC,Dongying 257086,China)
出处
《石化技术》
CAS
2017年第5期101-102,共2页
Petrochemical Industry Technology
关键词
可控震源
谐振
施工参数
影响
vibroseis
resonance
construction parameter
effect
