摘要
针对某多功能笔形状较复杂,多件模脱模较难的实际生产问题,借助UG注塑模向导设计了一种带有外部侧抽芯机构和内螺纹推出机构的一模八腔注塑模具。模具采用两板式结构,外部侧抽芯机构采用滑块,滑块外侧具有螺纹槽和侧型芯,内螺纹的脱模推出采用叶轮+螺旋杆,由推板最终推出制件。模具结构新颖,使用效果良好,对企业设计同类注塑模具有一定的借鉴作用。
Aimed at the multi-function pen with complex shape to hard product release,one module and eight cavities injectionmould was designed with a kind of side core-pulling mechanism with external and internal thread launch institutions by using UGinjection mold wizard.Die adopts two plate structure,external side core-pulling mechanism adopts slider,slider lateral has a threadgroove and side core,internal thread demoulding launch impeller+screw,finally introduced by pushing plate parts.The die structureis novel,it has proved that the use effect is good,which has the certain reference value to the design of similar injection mold of the enterprise.
作者
魏剑
高浩
王孝鹏
张雯娟
Wei Jian;Gao Hao;Wang Xiaopeng;Zhang Wenjuan(School of Mechanical & Electronic Engineering, Sanming University, Sanming 365004, China;Engineering Research Center in Fujian Province University for Modern Mechanical Design and Manufacturing Technology, Sanming 365004, China;Fujian Provincial Collaborative Innovation Center for Green Casting, Forging and Advanced Manufacturing, Sanming 365004, China;Fujian Provincial Engineering Research Center for Casting and Forging Parts, Sanming 365004, China)
出处
《工程塑料应用》
CAS
CSCD
北大核心
2017年第7期86-90,共5页
Engineering Plastics Application
基金
福建省教育厅科技项目(JK2014048)
三明学院校内项目(H160042)
三明学院科研课题(B0905/Q)
关键词
多功能笔
UG
软件
侧抽芯
内螺纹推出机构
注塑模设计
multi-function pen
UG software
side core-pulling
internal thread rolling mechanism
design of injection mold