摘要
In this paper, a low-cost activated carbon(AC) was prepared from deactivated resin catalyst(DRC) for methyl tert-butyl ether(MTBE) synthesis through carbonization and subsequent steam activation treatment. The activated carbon was characterized in detail. After loading various transition metals, including Cu^(2+), Ag+, Co^(2+), Ni^(2+), Zn^(2+), and Fe^(3+) via the ultrasonic-assisted impregnation method, a series of metal-loaded adsorbents(xM-AC) were obtained and their dimethyl sulfide(DMS) adsorption performance was investigated in a batch system. Among these adsorbents, 15Cu-AC presented a superior DMS adsorption capacity equating to 58.986 mg/g due to the formation of S-M(σ) bonds between Cu^(2+) and sulfur atoms of DMS as confirmed by the Raman spectra and kinetic study.
In this paper, a low-cost activated carbon(AC) was prepared from deactivated resin catalyst(DRC) for methyl tert-butyl ether(MTBE) synthesis through carbonization and subsequent steam activation treatment. The activated carbon was characterized in detail. After loading various transition metals, including Cu^(2+), Ag+, Co^(2+), Ni^(2+), Zn^(2+), and Fe^(3+) via the ultrasonic-assisted impregnation method, a series of metal-loaded adsorbents(xM-AC) were obtained and their dimethyl sulfide(DMS) adsorption performance was investigated in a batch system. Among these adsorbents, 15Cu-AC presented a superior DMS adsorption capacity equating to 58.986 mg/g due to the formation of S-M(σ) bonds between Cu^(2+) and sulfur atoms of DMS as confirmed by the Raman spectra and kinetic study.
基金
financially supported by the National Natural Science Foundation of China (No. 21276086)
