摘要
目的研究导弹在意外点火时排气道的力学性能及导弹发射的安全性,对排气道的极限承压性能进行研究。方法建立排气道的极限承压的仿真模型,通过水压试验及发射试验,获取排气道不同种试验方式下的极限承压数据。结果排气道在导弹正常发射时承压设计值为0.3 MPa。极限承压仿真试验过程中,排气道在受到0.5 MPa压强时,所受应力超过材料最大抗拉极限。水压试验过程中,排气道受0.58 MPa压强时,其结构发生破坏。意外点火试验过程中,排气道所受最大压强值为0.24 MPa。结论排气道的极限承压能力可以满足正常发射及意外点火的发射要求,排气道的设计裕量充足。
Objective To study limit pressure property of exhaust chimney,mechanical property of the exhaust chimneyin unexpected ignition of missile and the safety of missile launching.Methods A simulation model for limit pressuresof exhaust chimney was built.Water pressure experiment and launching experiment were carried out to obtain date onlimit pressure of the exhaust chimney in different types of test.Results The design pressure of the exhaust chimney inabnormal launching was0.3MPa.The stress of the exhaust chimney surpassed the maximum tensile limit was0.5MPa.The structure was destroyed at0.58MPa in the water pressure experiment.The limit pressure of the exhaust chimney was0.24MPa in unexpected ignition.Conclusion The limit pressure of exhaust chimney meets the requirements of normallaunching and unexpected ignition.The design allowance of the exhaust chimney is enough.
作者
任克亮
吴利民
REN Ke-liang;WU Li-min(713 Research Institute of China Shipbuilding Industry Corporation, Zhengzhou, 450015, China)
出处
《装备环境工程》
CAS
2017年第9期53-56,共4页
Equipment Environmental Engineering
关键词
热发射
排气道
正常发射
意外点火
极限承压
heat launch
exhaust chimney
normal launching
unexpected ignition
limit pressure