期刊文献+

消除OpenFlow网络中UDP冗余控制分组的机制 被引量:1

Mechanism of eliminating UDP redundancy control packets in Open Flow network
下载PDF
导出
摘要 无连接的UDP数据流产生的大量冗余控制分组会对SDN控制器和网络产生严重的性能影响。首先,测试并建模分析了冗余控制分组对控制器性能的危害,进而形成了解决该问题的基本思路。由此提出一种基于预装流表并滤除冗余分组(PFFR,preinstalling flow-tables&filtering redundant-packets)机制。PFFR通过预装转移流表项限制UDP控制分组的初始速率,并通过按路径安装流表和冗余分组滤除算法快速消除冗余控制分组。实现了基于PFFR的原型系统并进行了测试,结果表明,PFFR方法能够有效提升控制器的性能。 Large numbers of redundant control packets produced by connectionless UDP flows may engender serious influence over the performance of the SDN controllers and networks.The endangerment of the redundant control packets for the performance of SDN controllers by testing and modeling was firstly analyzed,and then a basic solution to solve the problem was formed.Therefore,a preinstalling flow-tables&filtering redundant packets(PFFR)mechanism was proposed.By preinstalling flow tables,PFFR limited the initial rate of control packets in UDP flows,and through installing flow tables according to paths and utilizing the redundant packets filtering algorithm,PFFR eliminated redundant packets rapidly.A prototype system based on PFFR was implemented and tested.The experimental results prove that the PFFR mechanism can effectively improve the performance of the controller.
作者 胡慧 陈鸣 刘波 许博 邢长友 胡超 HU Hui;CHEN Ming;LIU Bo;XU Bo;XING Chang-you;HU Chao(College of Command Information Systems, PLA Army Engineering University, Nanjing 210007, China;College of Computer Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China;Key Laboratory of Computer Network and Information Integration, Southeast University, Nanjing 211189, China)
出处 《通信学报》 EI CSCD 北大核心 2017年第9期167-175,共9页 Journal on Communications
基金 国家重点基础研究发展计划("973"计划)基金资助项目(No.2012CB315806) 国家自然科学基金资助项目(No.61379149) 江苏省科技计划基金资助项目(No.BY2013095-1-06) 江苏省自然科学基金资助项目(No.BK20140070) 复杂电子系统仿真重点实验室基础研究基金资助项目(No.DXZT-JC-ZZ-2015-018)~~
关键词 OpenFlow 控制器 UDP流 冗余分组 预安装流表 OpenFlow controller UDP flow redundant packet preinstall flow table
  • 相关文献

参考文献1

二级参考文献14

  • 1Software defined networking [EB/OL].[ 2013-05-13 ]. https ://www. opennetworking, org.
  • 2Mckeown N, Anderson T, Balakrishnan OpenFlow: EnabLing innovation in campus networks [J] ACM SIGCOMM Computer Communication Review, 2008 38(2): 69-74.
  • 3Yu Minglan, Rexford J, Freedman M, et al. Scalable flow based networking with DIFANE EC //Proc of the ACM SIGCOMM2010. NewYork: ACM, 2010: 351-362.
  • 4Mogul J, Tourrilhes J, Yalagandula P, et al. DevoFlow: Scaling flow management for high performance networks [C] //Proc of the ACM SIGCOMM 2011. New York: ACM, 2011, 254-265.
  • 5Tootoonchian A, Ganjali Y. HyperFlow: A distributed control plane for OpenFlow [C] //Proe of Internet Network Management Workshop/Workshop on Research on Enterprise Networking ( INM/WREN ). Berkeley, CA: USENIX Association, 2010: 3- 3.
  • 6Koponen T, Casado M, Gude N, et al. Onix: A distributed control platform for large scale production networks [C] // Proc of the 9th USENIX Conf on Operating Systems Design and Implementation ( OSDI ). Berkeley, CA: USENIX Association, 2010: 351-364.
  • 7Yeganeh S, Ganjali Y. Kandoo: A framework for efficient and scalable offloading of control applications [C] //Proc of the ACM SIOCOMM 2012 Workshop on Hot Topics in Software Defined Networking (HotSDN). New York: ACM, 2012: 19-24.
  • 8Tootoonchian A, Gorbunov S, Ganjali Y, et al. On controller performance in software defined networks [C] // Proc of the 2nd USENIX Workshop on Hot Topics in Management of Internet, Cloud, and Enterprise Networks and Services ( Hot-ICE ). Berkeley, CA: USENIX Association, 2012 10-10.
  • 9Gude N, Koponen T, Pettit J, et al. Nox: Towards an operating system for networks [J]. ACM Computer Communication Review, 2008, 38(3): 105-110.
  • 10Pfaff B, Pettit J, Koponen T, et al. Extending networking into the virtualization layer [C] //Proc of the ACM SIGCOMM 2009 Workshop on Hot Topics in Networks (HotNets Ⅶ). New York: ACM, 2009.

共引文献7

同被引文献1

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部