期刊文献+

Microstructural evolution during reheating of A356 machining chips at semisolid state 被引量:1

Microstructural evolution during reheating of A356 machining chips at semisolid state
下载PDF
导出
摘要 The microstructural evolution of A356 machining chips in the semisolid state was studied at different temperatures and holding times. The results showed that the elongated α-Al grains first recrystallized in the semisolid state and then became globular with a high shape factor(SF). Both the temperature and the holding time clearly affected the grain size and SF. When the heating temperature or holding time was increased, the grain size and SF gradually increased and finally became stable. Moreover, the Vickers hardness of primary α-Al grains gradually decreased with increasing heating temperature. The optimal slurry for semisolid processing, with a good combination of grain size and SF, was obtained when the chips were held at 600℃ for 15 min. The semisolid slurry of A356 chips exhibited a lower coarsening rate of α-Al grains than those produced by most of the conventional semisolid processes. The coarsening coefficient was determined to be 436 μm^3·s^(-1) on the basis of the linear Lifshitz–Slyozov–Wagner(LSW) relationship. The microstructural evolution of A356 machining chips in the semisolid state was studied at different temperatures and holding times. The results showed that the elongated α-Al grains first recrystallized in the semisolid state and then became globular with a high shape factor(SF). Both the temperature and the holding time clearly affected the grain size and SF. When the heating temperature or holding time was increased, the grain size and SF gradually increased and finally became stable. Moreover, the Vickers hardness of primary α-Al grains gradually decreased with increasing heating temperature. The optimal slurry for semisolid processing, with a good combination of grain size and SF, was obtained when the chips were held at 600℃ for 15 min. The semisolid slurry of A356 chips exhibited a lower coarsening rate of α-Al grains than those produced by most of the conventional semisolid processes. The coarsening coefficient was determined to be 436 μm^3·s^(-1) on the basis of the linear Lifshitz–Slyozov–Wagner(LSW) relationship.
出处 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2017年第8期891-900,共10页 矿物冶金与材料学报(英文版)
基金 financially supported by the International Science and Technology Cooperation Program of China (No.2015DFA51430) the National Natural Science Foundation of China (No.51401010) the Aeronautical Science Foundation of China (No.2015ZF51069)
关键词 SEMISOLID slurry aluminum CHIPS MICROSTRUCTURAL evolution grain COARSENING MICROHARDNESS semisolid slurry aluminum chips microstructural evolution grain coarsening microhardness
  • 相关文献

参考文献5

二级参考文献33

  • 1郭洪民,杨湘杰,胡斌.转动输送管制浆工艺参数对A356合金半固态组织的影响[J].中国有色金属学报,2004,14(12):2049-2054. 被引量:45
  • 2张小立,谢水生,李廷举,杨浩强,金俊泽.阻尼冷却管法制备A356铝合金半固态浆料的研究[J].稀有金属材料与工程,2007,36(5):915-919. 被引量:27
  • 3管仁国,石路,邢振环,王超,马廷威,尚剑洪.新型倾斜板技术制备半固态AlSi6Mg2合金及触变成形[J].铸造,2007,56(7):694-697. 被引量:13
  • 4S. Tahamtan, M.A. Golozar, F. Karimzadeh, and B. Nirou- mand, Microstructure and tensile properties of thixoformed A356 alloy, Mater. Charact., 59(2008), No. 3, p. 223.
  • 5H.V. Atkinson, Modelling the semisolid processing of metal- lic alloys, Prog. Mater. Sci., 50(2005), No. 3, p. 341.
  • 6Z. Fan, Semisolid metal processing, lnt. Mater. Rev., 47(2002), No. 2, p. 1.
  • 7M.H. Robert, E.J. Zoqui, F. Tanabe, and T. Motegi, Produc- ing thixotropic semi-solid A356 alloy:.microstructure forma- tion x forming behaviour, J. Achiev. Mater. Manuf Eng., 20(2007), No. 1-2, p. 19.
  • 8T. Haga and S. Suzuki, Casting of aluminum alloy ingots for thixoforming using a cooling slope, J. Mater. Process. Tech- nol., 118(2001), No. 1-3, p. 169.
  • 9Y. Birol, A357 thixoforming feedstock produced by cooling slope casting, J. Mater. Process. Technol., 186(2007), No. 1-3, p. 94.
  • 10M.A. Bayoumi, M.I. Negm, and A.M. E1-Gohry, Micro- structure and mechanical properties of extruded A1-Si alloy (A356) in the semi-solid state, Mater. Des., 30(2009), No. 10, p. 4469.

共引文献14

同被引文献8

引证文献1

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部