摘要
针对某型号茶树修剪机振动和噪声过大的问题,设计并进行了两个阶段的实验,对振动和噪声信号进行了测试和分析。第一阶段的测试在设备机体上布置了多处测点,找出振动信号强烈的部位和方向,并测试噪声辐射强烈部位的声压信号。由频谱分析确定了两种信号的主要成分以及信号频率之间的关系。第二阶段的测试主要对设备动力总成悬置系统的隔振性能进行测试和评价,发现其悬置系统没有在振动传递路径上有效起到隔振的作用。
To figure out the problems of vibration and noise in a certain type of tea tree pruning machine,two experiments aredesigned and carried out.The first one is to measure the vibrations and noise of various points on the body of the tested machine,to find out the essential positions and directions of vibration signal and the noise radiation.By spectrum analysis of the measuredvibration and noise signals,the main components of the signal and the relationship between the two significant signal frequenciesare determined.The second experiment is mainly to test and evaluate the anti-vibration performance of the power-train mountingsystem.It is found that the mounting system does not work efficiently.
作者
邓小龙
王书文
张东东
梅洁
姜坤
Deng Xiaolong;Wang Shuwen;Zhang Dongdong;Mei Jie;Jiang Kun(School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China)
出处
《农业装备与车辆工程》
2017年第10期38-43,共6页
Agricultural Equipment & Vehicle Engineering
关键词
茶树修剪机
振动噪声测试
频谱分析
隔振
悬置系统
tea tree pruning machine
vibration and noise test
spectrum analysis
anti-vibration
powertrain mounting system
