摘要
用十溴二苯乙烷(DBDPE)和三氧化二锑(Sb_2O_3)组成的协效阻燃体系作为聚苯乙烯(PS)的阻燃剂,采用熔融共混制备PS片材,并探究了不同配比下,Br/Sb阻燃剂的阻燃效果。结果表明,DBDPE和Sb_2O_3之间存在很好的协效作用,Br/Sb阻燃剂的加入明显提高了PS的热稳定性及阻燃性能。当PS/(Br+Sb)的质量比为83/17(其中Br/Sb质量比为17/3)时,片材的阻燃性能最佳,其UL94测试达到V–0级别,极限氧指数可达30.1%。在力学性能方面,Br/Sb阻燃剂的加入对PS材料的冲击强度影响较小,其拉伸强度有明显降低。
Synergistic flame retardant system composed of decabromodiphenyl ethane(DBDPE)and antimony trioxide(Sb2O3)was used in polystyrene(PS).The PS board composites were prepared by melt blending-extruded,and the flame retardant effect of Br/Sb flame retardant was investigated under different proportions.The experimental results show that there is a good synergistic effect between DBDPE and Sb2O3.The addition of Br/Sb flame retardant improves the thermal stability and flame retardancy of the composites.When the mass ratio of PS/Br+Sb=83/17(Br/Sb=17/3),the flame resistance of the composites is the best,and the UL94test reaches the V-0level,LOI up to30.1%.In terms of mechanical properties,the addition of Br/Sb flame retardant does not have much effect on the impact strength of the material,and the tensile strength of the material is weakened.
作者
许贺
王利
孙佳惠
张胜
苑会林
谷晓昱
孙军
李洪飞
Xu He;Wang Li;Sun Jiahui;Zhang Sheng;Yuan Huilin;Gu Xiaoyu;Sun Jun;Li Hongfei(Beijing University of Chemical Technology, College of Material Science and Technology , Beijing 100029, China;Beijing Key Laboratory of Advanced Functional Polymer Composites, Beijing 100029, China)
出处
《工程塑料应用》
CAS
CSCD
北大核心
2017年第12期39-42,共4页
Engineering Plastics Application
关键词
十溴二苯乙烷
三氧化二锑
协效阻燃
聚苯乙烯
应用
decabromodiphenyl ethane
antimony trioxide
synergistic effect
polystyrene
application
