基于ARM与Linux的开放式数控系统具体实现

The Open CNC System Based on ARM and Linux Implementation

随着嵌入式系统的深入发展,在工业控制的每个系统应用越来越广泛,数控系统也不列外。本文从数控系统的软件和硬件两个方面入手,分析对比了ARM系列产品的优缺点,并选型了ARM9,分上下两层进行了设计;进而实现了基于Linux数控系统软件,分别描述了数控系统软件总体的架构、开发方式的设想以及软件开发的具体步骤,通过硬件和软件的具体实现,旨在提升数控系统的效率。

With the development of embedded system,more and more widely used in industrial control system,CNC system is not out of the list.This paper from two aspects of hardware and software of CNC system,advantages and disadvantages of the ARM series of products,and the selection of ARM9,divided into two layers of the design;so as to realize the NC system software based on Linux,describes the specific steps of CNC system softwarearchitecture,development ideas and software the development,through the realization of hardware and software,to enhance the efficiency of CNC system.