期刊文献+

基于霍尔传感器阵列的电流测量系统 被引量:17

Hall effect element array based current measurement system
下载PDF
导出
摘要 集磁环的存在导致开环式和闭环式霍尔效应传感器存在磁饱和现象。一种由多个霍尔元件构成圆形阵列方式的传感器阵列电流测量系统,通过测量一次导线产生的磁场计算得到被测电流数值克服了这一现象。首先建立霍尔传感器阵列数学模型,分析霍尔元件数量、载流体偏心引入的误差变化,然后设计加权增益调整电路、移相电路和基于电压反馈的功率放大电路,用于实现大功率信号输出,最后根据试验结果证明,所设计的电流测量系统整体准确度达到0.2级水平。该电流测量系统包含16个霍尔元件,检测电流变比为600 A/5 A,系统功耗仅0.4 W。 Open-loop hall current transformer and closed-loop hall current transformer suffer the problem of magnetic saturation in the presence of magnetic core.A current measurement system based on Hall effect element array was developed,including the Hall effect sensor array and the electronic circuit.The circular array is composed of asurge of Hall element to approximate integration,and the measured current can be calculated by measuring the magnetic flux density induced by primary conductor.Firstly,the mathematic module of the array was formulated,and the error variation in the case of eccentric was investigated.Afterwards,the electronic circuit composed of the weighted gain adjustment circuit,the phase shift circuit and the power amplifier circuit were deigned to output high power signal.Finally,the basic error testing and the location influence experiment were performed.The results validate that the designed system can meet the requirement of0.2accuracy class.The designed system comprises16Hall elements,additionally,current ratio of the system is600A/5A,while the power consumption is only0.4W.
作者 项琼 岳长喜 胡琛 朱凯 龚慧 王欢 Xiang Qiong;Yue Changxi;Hu Chen;Zhu Kai;Gong Hui;Wang Huan(China Electrical Power Research Institute,Wuhan 430074,China;School of Electrical ann Electronic Engineering,Huazhong University of Science arin Technology,WuUan 433077,China)
出处 《电测与仪表》 北大核心 2017年第23期105-110,共6页 Electrical Measurement & Instrumentation
基金 国家电网公司科技项目(JL71-15-023)
关键词 霍尔传感器 阵列 电流 测量系统 偏心 Hall effect sensor array current measurement system eccentricity
  • 相关文献

参考文献10

二级参考文献113

共引文献235

同被引文献159

引证文献17

二级引证文献28

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部