期刊文献+

基于多级放大结构的高速低功耗时间数字转换器设计 被引量:1

Design of a High Speed Low Power Time-to-Digital Converter Based on Multi-stage Amplification Structure
下载PDF
导出
摘要 提出一种多级放大时间数字转换器新型结构。该结构由粗测和细测组成,粗测部分利用延时链得到小于一个延时单元的关键余量,并设计了面积小、功耗低的关键余量选择逻辑。细测部分,利用两倍时间放大器和过半判断器从高位到低位依次产生4位二进制码。在SMIC 65 nm工艺下仿真,新型结构的分辨率为1.44ps,量程为736 ps,转换速度可达470 MS/s,在100 MHz频率下,平均功耗仅为1.3 m W。对两倍时间放大器设计了校准电路,提高了抵抗PVT的能力,得到良好的积分非线性。 The authors present a time-to-digital converter based on multi-stage amplification structure.This structure consists of coarse stage and fine stage.Coarse stage utilizes delay line to get the residue which is less than a buffer’s delay.A small area and low power residue selecting logic is designed.In the fine stage,2×time amplifier and half judger is utilized to generate 4 binary codes from MSB to LSB.Simulation in SMIC 65 nm process shows that the new structure has a high conversion speed up to 470 MS/s and power consumption is 1.3 mW at 100 MHz with the resolution of 1.44 ps and range of 736 ps.An accurate gain robust to PVT variation can be achieved with the calibration of the time amplifier,so a good integral nonlinearity is obtained.
作者 范传奇 贾嵩 王振宇 严伟 吴泽波 FAN Chuanqi;JIA Song;WANG Zhenyu;YAN Wei;WU Zebo(School of Software and Microelectronics,Peking University,Beijing 100871;Key Laboratory of Microelectronics Devices and Circuits(MOE),School of Electronics Engineering and Computer Science,Peking University,Beijing 100871)
出处 《北京大学学报(自然科学版)》 EI CAS CSCD 北大核心 2018年第2期299-306,共8页 Acta Scientiarum Naturalium Universitatis Pekinensis
关键词 时间数字转换器 时间放大器 高速 低功耗 time-to-digital converter time amplifier high speed low power
  • 相关文献

同被引文献2

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部