摘要
田湾核电站3号机组物理启动专用测量系统为俄供设备,作为反应堆状态监测的重要系统,主要用于反应堆物理启动阶段的数据采集与分析。本文介绍了系统的组成、工作原理、技术特点及系统调试相关试验等,对系统调试试验的准备及实施进行了分析;调试试验结果表明系统各项性能指标符合技术要求,可用于3号机组启动物理试验。
The software and hardware measurement complex of unit 3 TNPS is supplied by Russia,as an important system for reactor state monitoring,which is used for data acquisition and analysis during the reactor start-up phase.The system structure,working principle,technical characteristics and system commissioning related tests were introduced,the preparation and execution of system commissioning tests were analyzed.Commissioning test results showed that the performance of the system can meet the technical requirement,SHMC can be applied for start-up physical tests of unit 3.
作者
宋辉
杨晓强
叶刘锁
黄鹏
SONG Hui;YANG Xiaoqiang;YE Liusuo;HUANG Peng(Research Institute of Nucalear Power Operation..CNNC,Wuhan 430223,China;Jiangsu Nuclear Power Corporation,Lianyungang 222042,China)
出处
《核安全》
2018年第1期38-43,共6页
Nuclear Safety
关键词
SHMC
调试
物理启动
探测器
SHMC
commissioning
physical start-up
detection