期刊文献+

Preparation of ultrafine silver powders with controllable size and morphology 被引量:9

具有可控粒径和形貌超细银粉的合成(英文)
下载PDF
导出
摘要 The ultrafine silver powders were prepared by liquid reduction method using Arabic gum as dispersant.The effects of different dispersants,pH values,and temperature on the morphology and particle size of silver powders were investigated.It is found that Arabic gum can better adsorb on silver particles via chemical adsorption,and it shows the best dispersive effect among all the selected dispersants.The particle size of silver powders can be finely tuned from 0.34 to 4.09μm by adjusting pH values,while the morphology of silver powders can be tuned by changing the temperature.The silver powders with high tap density higher than 4.0 g/cm3 were successfully prepared in a wide temperature range of 21.8-70°C.Especially,the tap density is higher than 5.0 g/cm3 when the temperature is optimized to be 50°C.The facile process and high silver concentration of this method make it a promising way to prepare high quality silver powders for electronic paste. 以阿拉伯树胶为分散剂,采用液相还原法制备超细银粉。探讨分散剂种类、p H值和温度对银粉形貌和粒径的影响。研究表明,阿拉伯树胶通过化学吸附作用可以更好地吸附在银粒子表面,且比其他分散剂具有更好的分散作用。通过调节p H值,银粉的粒径可在0.34~4.09μm的范围内调节;通过改变反应温度可以控制银粉的表面形貌。在21.8~70°C的温度范围内,可成功制备振实密度大于4.0 g/cm^3的银粉。在50°C的最优温度下,银粉的振实密度大于5.0 g/cm^3。该合成方法具有条件温和、银浓度高的优点,是一种合成用于电子浆料的高品质银粉的有前景的方法。
作者 Qing-hua TIAN Duo DENG Yu LI Xue-yi GUO 田庆华;邓多;李宇;郭学益(中南大学冶金与环境学院,长沙410083;中南大学中国有色金属工业协会清洁冶金工程研究中心,长沙410083)
出处 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2018年第3期524-533,共10页 中国有色金属学报(英文版)
基金 Project(2014DFA90520)supported by the International Cooperation Program of Ministry of Science and Technology of China Project(2013A090100003)supported by the Production,Teaching and Research Program of Guangdong Province,China Project(2013DY048)supported by the Science and Technology Cooperation Program of Daye Nonferrous Metals Group,China
关键词 ultrafine silver powder Arabic gum dispersion mechanism tap density controllable preparation 超细银粉 阿拉伯树胶 分散机理 振实密度 可控制备
  • 相关文献

参考文献1

二级参考文献14

  • 1[11]Yasuhiro Konakawa, Kozo Ishizaki. The particle size distribution for highest relative density in compacted body. Powder Technology,1990, 63:241 ~246.
  • 2[12]Liu J X, Davies T J. Coordination number-density relationships for random packing of spherical powders. Powder Metallurgy, 1997,40: 48~50.
  • 3[14]Hirschhorn J S. Introduction to powder metallurgy. American Powder Metallurgy Institute, 1969, 82:.
  • 4[1]German M. Powder metallurgy science. Princeton, New Jersey: Metal Powder Industries Federation, 1993.
  • 5[2]German. Randall M. Particle packing characteristics. Princeton, New Jersey: Metal Powder Industries, Federation, 1989.
  • 6[3]Yu A B, Standish N. A study of the packing of particles with a mixture size distribution. Powder Technology, 1993 , 76: 113 ~ 124.
  • 7[4]Scott G D. Packing of equal sphere. Nature, 1960, 188: 908- 909.
  • 8[5]Scott G D. Radial distribution of the random close packing of equal spheres. Nature, 1962, 194:956 ~ 957.
  • 9[6]Yerazunis S, Cornell S W, Wintner B. Dense random packing of binary mixtures of spheres. Nature, 1965, 207:835 ~ 837.
  • 10[7]Stovall T, Delarrard F, Buil M. Linear packing density model of grain mixtures. Powder Technology, 1986, 48: 1 - 12.

共引文献18

同被引文献161

引证文献9

二级引证文献26

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部