摘要
采用微波技术消解聚合物塑料样品,使用电感耦合等离子体原子发射光谱(ICP-AES)法测定聚合物中的铅(Pb)和镉(Cd)含量,并建立了优化的样品消解程序和测定方法,结果表明,测定中Pb的相对标准偏差为1.8%,Cd的相对标准偏差为0.21%,对标准物质的测定值与标准值基本一致。方法具有效率高、污染小的优点,方法准确,可靠。
In this article,content of lead(Pb)and cadmium(Cd)in polymer plastic samples were determined by microwave digestion-inductively coupled plasma-atomic emission spectrometry.The optimized sample digestion procedure and determination method was established.The results showed the relative standard deviation for Pb was 1.8%and for Cd 0.21%.The method has high efficiency,low pollution and showing results with good precision.
作者
臧真娟
周蕾玲
ZANG Zhenjuan;ZHOU Leiling(National Center of Quality Supervision&Testing for Copper-lead-zinc Product,Tongling,Anhui 244000,China)
出处
《中国无机分析化学》
CAS
2018年第2期14-16,共3页
Chinese Journal of Inorganic Analytical Chemistry
关键词
电感耦合等离子体原子发射光谱法
微波消解
塑料
inductively coupled plasma-atomic emission spectrometry
microwave digestion
plastics