摘要
采用回填式搅拌摩擦点焊(RFSSW)对上下板厚度分别为1.5 mm和2 mm的包铝2A12(LY12)铝合金进行焊接,主要对比套筒下扎式和搅拌针下扎式RFSSW接头组织与性能的不同。试验结果表明:工艺参数选择不当时,2种下扎方式分别产生位于热机影响区/焊核区(TMAZ/WZ)界面和WZ中心的未充分回填缺陷。虽然呈现同种断裂方式,套筒下扎式RFSSW接头因更宽的搭接区面积而拉剪强度更高。除此之外,套筒下扎式RFSSW接头WZ的硬度也更高。
出处
《焊接技术》
2018年第4期93-96,共4页
Welding Technology