摘要
为了获得高功率、高重复频率的紫外脉冲激光器,采用1064nm基频光通过三硼酸锂(LBO)晶体与3次谐波355nm进行和频得到4次谐波266nm紫外激光的方法,进行了实验验证,取得了重复频率为20k Hz、紫外激光器的平均输出功率为2.5W、红外到紫外的转换效率为12.5%的实验数据。结果表明,此脉冲激光器利用LBO晶体在高重复频率下取得了较大的紫外平均输出功率。
In order to achieve the ultraviolet pulsed laser with the high power and high frequency,the fourth harmonic 266nm in LiB 3O 5(LBO)crystal was generated by frequency mixing of the fundamental(1064nm)and third harmonic(355nm)of electro-optical Q-switched laser,and experiment verification was carried out.Deep ultraviolet(UV)output power of 2.5W at 266nm with the repetition rate at 20kHz and 12.5%infrared(IR)-to-UV conversion efficiency were achieved.The result show that the pulse laser has achieved a large average output power at high repetition frequency by using LBO crystal.
作者
卢一鑫
杨森林
赵小侠
张变莲
LU Yixin;YANG Senlin;ZHAO Xiaoxia;ZHANG Bianlian(Institute of Applied Physics,Xi’an University,Xi’an 710065,China)
出处
《激光技术》
CAS
CSCD
北大核心
2018年第1期100-103,共4页
Laser Technology
基金
国家自然科学基金资助项目(61401356)
关键词
激光器
紫外
2次谐波
3次谐波
4次谐波
三硼酸锂晶体
lasers
ultraviolet
the second harmonic generation
the third harmonic generation
the fourth harmonic generation
LiB3O5 crystal