摘要
Z型支撑座工装作为某船厂典型的船用工装设备,在其支撑作业过程中承受较大的船体集中力载荷作用。文章针对该类型工装实际现场使用工况,基于有限元方法对其支撑工装结构型式进行研究分析。通过参数化分析,得到了该类型支撑工装结构尺寸对结构强度的影响,提出并分析了支撑工装结构型式的优化。为类似支撑工装结构设计提供参考。
As the typical ship fix equipment,the Z-type support base fixture bears the large concentrated force load effect of the hull during its support operation.According to the actual usage conditions of the support base fixture,based on the finite element method,the structure type of the support base fixture is studied and analyzed.Through the parametric analysis,the influence of the structural dimension of the type support base structure on the structure strength is gained.The optimization of the structure type of support base fixture is proposed,which offers reference for the similar support base fixture.
作者
袁亚银
孙苏龙
刘金锋
马世领
YUAN Yayin;SUN Sulong;LIU Jinfeng;MA Shiling(School of Naval Architecture,Ocean and Civil Engineering,Shanghai Jiao Tong University,Shanghai 200240,China;Hudong-Zhonghua Shipbuilding(Group)Co.,Ltd.,Design Management Department,Shanghai 200129,China;College of Shipbuilding Engineering,Harbin Engineering University,Harbin 150000,China)
出处
《船舶标准化工程师》
2018年第4期49-54,共6页
Ship Standardization Engineer
关键词
支撑座工装
结构强度
参数化分析
优化
support base fixture
structure strength
parametric analysis
optimization
