摘要
目的以CC2530单片机为核心,设计出一个远程无线心电监测系统。方法在CC2530单片机上实现心电信号的采集转换和数据处理,然后通过Zig Bee将数据传输到协调器,实现了心电信号和心率变异性数据的实时监测的功能。结果经测试,该系统的最大误差为3 beat/min,平均误差为1.6 beat/min。符合中华人民共和国医药行业标准。结论该设备有便携测量精度高的特点,具备一定参考价值和实用性。
Objective A remote wireless electrocardiogram(ECG)monitoring system is designed by using the CC2530 microcontroller as the device core.Methods Acquisition,conversion and data processing for ECG signals are realized on CC2530 micro-controllers.And the ECG data is transmitted to the coordinator by using ZigBee.It realizes the real-time monitoring of ECG signals and heart rate variability(HRV)data.Results The test results show that the maximum error of the designed ECG monitoring analyzer is 3 beats per minute and the average error is 1.6 beats per minute,which can meet the requirement of pharmaceutical industry standards of the People's Republic of China.Conclusion The ECG monitoring analyzer has good portability,high measurement precision and good practical application values.
作者
潘天文
田青
魏朋博
虞致国
顾晓峰
PAN Tianwen;TIAN Qing;WEI Pengbo;YU Zhiguo;GU Xiaofeng(Engineering Research Center of IoT Technology Applications(Ministry of Education),Department of Electronic Engineering,Jiangnan University,Wuxi,214122)
出处
《中国医疗器械杂志》
2018年第4期253-255,共3页
Chinese Journal of Medical Instrumentation
基金
江苏省六大人才高峰资助项目(2013-DZXX-027)
中央高校基本科研业务费专项资金资助(JUSRP51323B)
江苏省研究生科研与实践创新计划项目(SJLX16_0500,KYLX16_0776,SJCX17_0510)
