摘要
A quenching and partitioning(Q&P) process was applied to vanadium carbide particle(VCp)-reinforced Fe-matrix composites(VC-Fe-MCs) to obtain a multiphase microstructure comprising VC, V8 C7, M3 C, α-Fe, and γ-Fe. The effects of the austenitizing temperature and the quenching temperature on the microstructure, mechanical properties, and wear resistance of the VC-Fe-MCs were studied. The results show that the size of the carbide became coarse and that the shape of some particles began to transform from diffused graininess into a chrysanthemum-shaped structure with increasing austenitizing temperature. The microhardness decreased with increasing austenitizing temperature but substantially increased after wear testing compared with the microhardness before wear testing; the microhardness values improved by 20.0% ± 2.5%. Retained austenite enhanced the impact toughness and promoted the transformation-induced plasticity(TRIP) effect to improve wear resistance under certain load conditions.
A quenching and partitioning(Q&P) process was applied to vanadium carbide particle(VCp)-reinforced Fe-matrix composites(VC-Fe-MCs) to obtain a multiphase microstructure comprising VC, V8 C7, M3 C, α-Fe, and γ-Fe. The effects of the austenitizing temperature and the quenching temperature on the microstructure, mechanical properties, and wear resistance of the VC-Fe-MCs were studied. The results show that the size of the carbide became coarse and that the shape of some particles began to transform from diffused graininess into a chrysanthemum-shaped structure with increasing austenitizing temperature. The microhardness decreased with increasing austenitizing temperature but substantially increased after wear testing compared with the microhardness before wear testing; the microhardness values improved by 20.0% ± 2.5%. Retained austenite enhanced the impact toughness and promoted the transformation-induced plasticity(TRIP) effect to improve wear resistance under certain load conditions.
基金
financially supported by the National Natural Science Foundation of China(Nos.51475480 and U1637601)
the Research Funding from the State Key Laboratory of High-Performance Complex Manufacturing(No.ZZYJKT2017-01)
Innovation Platform and Talent Plan of Hunan Province(No.2016RS2015)
the Project of Innovation Driven Plan in Central South University(No.2015CX002)
