期刊文献+

Influence of spark plasma sintering on microstructure and corrosion behaviour of Ti-6Al-4V alloy reinforced with micron-sized Si_3N_4powder 被引量:2

Influence of spark plasma sintering on microstructure and corrosion behaviour of Ti-6Al-4V alloy reinforced with micron-sized Si_3N_4powder
下载PDF
导出
摘要 Ti-6 Al-4 V-Si3 N4 composites were effectively fabricated by spark plasma sintering(SPS) technique. The addition of Si_3 N_4 on Ti-6 AI-4 V was varied from 5% to 15%(wt fraction). The effect of Si_3 N_4 addition on the densification, microstructure, and microhardness and corrosion behaviour of Ti-6 Al-4 V was investigated.An increase in microhardness value was recorded from 325.46 HV_(0.1) to 585.73 HV_(0.1). X-ray diffraction(XRD) analysis showed that the intensity of diffraction peaks of Si3 N4 phase in the composites increased.The sintered Ti-6 Al-4 V reinforced with Si_3 N_4 compacts revealed the non-existence of intermediate phases, such as TiSi_2(titanium silicide) which was expected. SEM analysis of the spark plasma sintered composites revealed a and β phase microstructures in Ti-6 Al-4 V with uniform distribution of Si3 N4 particulates in the matrix. The corrosion resistance property of the material was improved by the addition of Si_3 N_4 from 0.986629 mm/year to 0.030547 mm/year. Ti-6 Al-4 V-Si3 N4 composites were effectively fabricated by spark plasma sintering(SPS) technique. The addition of Si_3 N_4 on Ti-6 AI-4 V was varied from 5% to 15%(wt fraction). The effect of Si_3 N_4 addition on the densification, microstructure, and microhardness and corrosion behaviour of Ti-6 Al-4 V was investigated.An increase in microhardness value was recorded from 325.46 HV_(0.1) to 585.73 HV_(0.1). X-ray diffraction(XRD) analysis showed that the intensity of diffraction peaks of Si3 N4 phase in the composites increased.The sintered Ti-6 Al-4 V reinforced with Si_3 N_4 compacts revealed the non-existence of intermediate phases, such as TiSi_2(titanium silicide) which was expected. SEM analysis of the spark plasma sintered composites revealed a and β phase microstructures in Ti-6 Al-4 V with uniform distribution of Si3 N4 particulates in the matrix. The corrosion resistance property of the material was improved by the addition of Si_3 N_4 from 0.986629 mm/year to 0.030547 mm/year.
出处 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2018年第5期403-407,共5页 Defence Technology
基金 financial support from National Research Foundation(NRF), Pretoria, South Africa
关键词 Spark plasma sintering SI3N4 TI-6AL-4V MICROSTRUCTURE Corrosion Spark plasma sintering Si_3N_4 Ti-6Al-4V Microstructure Corrosion
  • 相关文献

同被引文献20

引证文献2

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部