期刊文献+

基于LabVIEW的NO_x浓度检测系统的设计

Design of NO_x Concentration Detection System Based on LabVIEW
下载PDF
导出
摘要 开发了一套基于LabVIEW的NO_x浓度检测系统。针对检测系统对微弱信号检测与提取的要求,设计了一个以电流电压转换器、仪表放大器以及二阶低通滤波器为主要电路结构的mA级数字电流表。利用该检测系统可采集样本数据,数据通过基于最小二乘算法的曲线拟合来绘制浓度曲线从而确定被采样环境的NO_x浓度值。实验表明:该系统有效抑制了噪声干扰,提高了检测的精确度,具有很强的实用性。 A NO x concentration detection system based on LabVIEW was developed.According to the requirement of weak signal detection and extraction in this system,a milliampere digital ammeter based on current and voltage converter,instrument amplifier and two order low-pass filter was designed.The system was used to collect sample data,while the curve was obtained by the least square fitting of the data to get the NO x concentration.The experimental results show that the system can effectively suppress noise interference and improve the accuracy of concentration detection,the system is very practical.
作者 李幸 周凤星 严保康 LI Xing;ZHOU Feng-xing;YAN Bao-kang(College of Information Science and Engineering,Wuhan University of Science and Technology,Wuhan 430081,China)
出处 《仪表技术与传感器》 CSCD 北大核心 2018年第10期117-122,共6页 Instrument Technique and Sensor
基金 湖北省教育厅资助项目(B2016006)
关键词 LABVIEW NOx浓度检测 微弱信号 最小二乘曲线拟合 mA级数字电流表 LabVIEW NO x concentration detection weak signal least square curve fitting milliampere digital ammete
  • 相关文献

参考文献4

二级参考文献32

共引文献149

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部