期刊文献+

碳化硅MOSFET换流回路杂散电感提取方法的优化 被引量:12

Optimized Extraction Method of Stray Inductance in Commutation Path for Silicon Carbide MOSFET
下载PDF
导出
摘要 在基于碳化硅(SiC)MOSFET器件的高压高频变换器中,快速的开关瞬态电流变化率di/dt会作用于换流回路杂散电感上,导致SiC MOSFET器件承受较大的电气应力,增加系统电磁干扰。因此,换流回路杂散电感的准确提取对于分析器件的开关特性非常关键。所以,该文提出了基于开关振荡频率的换流回路杂散电感提取方法,该方法具有不受杂散电阻、测量延时和平台尺寸的限制等优点。最后将该方法与现有的不同杂散电感提取方法进行了对比,验证了其有效性。 In high-voltage and high-frequency converters based on silicon carbide(SiC)MOSFET devices,the rapid changing rate of the switching transient current,di/dt,coupling with the stray inductance in commutation path,will cause the large electric stress and increase electromagnetic interference.The accurate extraction of the stray inductance of the commutating path is significant for analyzing the switching characteristics of the device.Thus,the stray inductance extraction method of commutation path based on the switching oscillation frequency is proposed.This method has some advantages of being independent from the influence of stray resistance,measurement delay,and platform size.Finally,the proposed method is compared to various existing methods for extracting stray inductances,and its accuracy is verified.
作者 谢宗奎 柯俊吉 赵志斌 黄华震 崔翔 Xie Zongkui;Ke Junji;Zhao Zhibin;Huang Huazhen;Cui Xiang(State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources North China Electric Power University Beijing 102206 China)
出处 《电工技术学报》 EI CSCD 北大核心 2018年第21期4919-4927,共9页 Transactions of China Electrotechnical Society
基金 国家重点研发计划资助项目(2016YFB0400503)
关键词 碳化硅 MOSFET 换流回路 杂散电感 开关振荡频率 Silicon carbide MOSFET commutation path stray inductance switching oscillation frequency
  • 相关文献

参考文献10

二级参考文献73

  • 1赵争鸣,张海涛,袁立强,白华,杨志.基于IGCT的高压三电平变频器失效机理及保护策略[J].电工技术学报,2006,21(5):1-6. 被引量:45
  • 2吴斌.大功率变频器及交流传动[M].北京:机械工业出版社,2007:80-86.
  • 3Ericsen T, Khersonsky Y, Steimer P K. PEBB concept applications in high power electronics converters[C]. IEEE Power Electronics Specialists Conference, Recife, Brazil, 2005.
  • 4Hingorani N G. Power electronics building block concepts[C]. IEEE Power Engineering Society General Meeting, Toronto, Canada, 2003.
  • 5Lee F C, Peng Dengming. Power electronics building block and system integration[C]. Power Electronics and Motion Control Conference, Beijin, China, 2000.
  • 6Steimer P K. Power electronics building blocks-a platform-based approach to power electronics[C]. IEEE Power Engineering Society General Meeting, Toronto, Canada, 2003.
  • 7Lounis Z, Rasoanarivo I, Davat B. Minimization of wiring inductance in high power IGBT inverter[J]. IEEE Trans. on Power Delivery, 2000, 15(2): 551-555.
  • 8Beukes H J, Enslin J H R, Spee R. Bus bar design consideration for high power IGBT converters[C]. IEEE Power Electronics Specialists Conference, St. Louis, Missouri, USA, 1997.
  • 9Moongilan D; Skin-effect modeling of image plane techniques for radiated emissions from PCB traces[C]. IEEE International Symposium on Electromagnetic Compatibility, Austin, TX, USA, 1997.
  • 10SkibinskiGL, DivanDM. Design methodology & modeling oflow inductance planar bus structures[C]. Fifth European Conference on Power Electronics and Applications, Brighton, UK, 1993.

共引文献187

同被引文献124

引证文献12

二级引证文献68

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部