摘要
为了解决激光透射难以实现连接聚苯乙烯与钛的问题,采用氧等离子体处理后的聚苯乙烯与经激光表面处理的薄钛进行了激光透射连接。建立了激光透射连接工艺参量的数学模型,分析了工艺参量对连接强度的交互式影响,得到了优化工艺参量。结果表明,经过处理后的聚苯乙烯与薄钛再进行激光连接时,其连接强度从0. 5MPa提高到6. 0MPa以上,有效解决了聚苯乙烯与钛的激光透射连接难题;通过优化工艺参量可获得最优的工艺参量组合。该研究为此工艺的工业应用奠定了基础。
In order to solve the problem that laser transmission was difficult to connect polystyrene and titanium,polystyrene treated with oxygen plasma was used for laser transmission connection with thin titanium treated by laser surface treatment.Mathematical model of laser transmission connection process parameters was established,and interactive influence of process parameters on connection strength was analyzed.The optimized process parameters were obtained.The results show that the bonding strength of polystyrene and thin titanium after treatment increases from 0.5MPa to more than 6.0MPa.Laser transmission connection problem of polystyrene and titanium can effectively be solved.The combination of the optimum process parameters can be obtained by optimizing the process parameters.The research makes the foundation for industrial application of the process.
作者
李静
刘会霞
谭文胜
孙跃东
申祥
王霄
LI Jing;LIU Huixia;TAN Wensheng;SUN Yuedong;SHEN Xiang;WANG Xiao(School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013,China;Changzhou Key Laboratory of Large Plastic Parts Intelligence Manufacturing,Changzhou 213164,China)
出处
《激光技术》
CAS
CSCD
北大核心
2018年第6期827-834,共8页
Laser Technology
基金
国家自然科学基金资助项目(51275219)
常州市高技术研究重点实验室资助项目(CM20153001)
关键词
激光技术
工艺参量优化
激光透射连接
响应曲面法
氧等离子体处理
表面处理
钛
聚苯乙烯
laser technique
process parameter optimization
laser transmission bonding
response surface method
oxygen plasma treatment
surface treatment
titanium
polystyrene