期刊文献+

复合材料热压罐固化工艺研发试验设计与适航验证 被引量:4

Testing Design and Airworthiness Verification for Composites Autoclave Curing Process
下载PDF
导出
摘要 叙述了复合材料热压罐固化工艺研发试验的制定依据和实施过程要求,重点介绍了复合材料热压罐固化工艺的材料、采样、关键工艺参数和测试项目的选择,对制造过程的下料、铺贴、机加和无损检测要求进行分析,明确了试验方案各关键环节的控制要求,并对复合材料热压罐固化工艺研发试验设计、工艺规范的建立以及对产品质量和形成的工艺规范的适航验证方法进行了阐述。对于工艺规范的适航验证,其工艺的稳定性是验证的重点,可以通过具有代表性的试片级、元件级试验件进行试验。 This paper describes the formulated basis and the implementary requirements for a composite autoclave curing process research plan,emphasis on the selecting of the materials,sampling,critical process parameter and testing items.This paper also specifies the critical control requirements for the cutting,plying,machining and non-destructive testing requirements during the fabrication and analyzes the influence of above factors on the quality of final composite parts,meanwhile introduces the experimental design for the composites autoclave curing process and the establishment of process specification.Finally,the paper introduces the product quality-keeping method and airworthiness verification method for composite parts fabrication process.For the airworthiness verification of composite process specifications,the stability of the process is the key point,which can be tested by using representative test panel and components.
作者 吴利华 张婷 WU Lihua;ZHANG Ting(Shanghai Aircraft Design and Research Institute,Shanghai 201210,China;Department of Discipline Engineering,AECC Commercial Aircraft Engine Co.,Ltd.,Shanghai 200241,China;Shanghai Engineering Research Center of Civil Aero Engine,Shanghai 200241,China)
出处 《航空制造技术》 2018年第19期92-96,101,共6页 Aeronautical Manufacturing Technology
基金 上海市科委课题(18DZ2204600)
关键词 复合材料 热压罐工艺 工艺研发 关键参数 试验设计 适航验证 Composites Autoclave process Process research Key parameter Testing design Airworthiness verification
  • 引文网络
  • 相关文献

参考文献3

二级参考文献13

  • 1张纪奎,郦正能,程小全,王军.复合材料整体结构在大型民机上的应用[J].航空制造技术,2007,0(9):38-38. 被引量:22
  • 2中国民用航空局航空器适航审定司.航空器型号合格审定程序.AP-21-AA-2011-03-R4,2011.
  • 3中国民用航空总局.中华人民共和国民用航空器适航管理条例,1987.
  • 4中国民用航空总局.民用航空产品和零部件合格审定规定,CCAR-21-R3,2007.
  • 5中国民用航空局航空器适航审定司.生产批准和监督程序,AP-21-AA-2010-04-R4.2011.
  • 6中国民用航空局.运输类飞机适航标准,CCAR-25-R4,2011.
  • 7Federal Aviation Administration. Quality control for the manufacture of composite structures, AC 21-26, 1989.
  • 8中国民用航空总局.CCAR-25中国民用航空规章第25部:运输类飞机适航标准[S].北京:中国民用航空总局.2001.
  • 9AP-21-AA-2011-03-R4航空器型号合格审定程序[S].2011.
  • 10Quality System for the Manufacture of Composite Structures,AC 21-26A.

共引文献12

同被引文献24

引证文献4

二级引证文献5

;
使用帮助 返回顶部