摘要
针对雷达装饰性涂层使用的聚氨酯半光漆光泽容易波动的问题,从一次性成膜厚度、稀释率、流平时间等涂装工艺参数以及温度、湿度等环境因素的角度进行了试验研究,结果表明,一次性成膜厚度、稀释率和环境相对湿度是影响半光聚氨酯漆膜光泽的主要因素,通过控制上述因素,能有效缩窄光泽的波动范围,显著提高雷达构件漆膜的合格率。
Some process parameters such as the thickness of coating sprayed in one time,dilution ratio,and leveling time,as well as the environmental factors i.e.temperature and humidity which were considered to be related to the fluctuation of glossiness of decorative semi-gloss polyurethane topcoat sprayed on radar were experimentally studied.The results showed that the key factors on glossiness are the thickness of coating sprayed in one time,dilution ratio,and relative humidity of the environment.The glossiness fluctuation was greatly reduced by controlling the three key factors,and thus the percentage of acceptable semi-gloss polyurethane topcoats on radar components were improved.
作者
杨军华
温力
王强
YANG Jun-hua;WEN Li;WANG Qiang(Nanjing Research Institute of Electronics Technology,Nanjing 210039,China)
出处
《电镀与涂饰》
CAS
CSCD
北大核心
2018年第22期1050-1054,共5页
Electroplating & Finishing
关键词
雷达
聚氨酯半光面漆
空气喷涂
光泽
膜厚
稀释率
相对湿度
radar
semi-gloss polyurethane topcoat
air spray
glossiness
coating thickness
dilution ratio
relative humidity