期刊文献+

河南地区回弹法检测混凝土测强曲线的试验研究 被引量:5

Experimental study of concrete strength-measuring curve by rebound method for Henan district
下载PDF
导出
摘要 通过对选定龄期为14 d、28 d、60 d、90 d、180 d和365 d的混凝土试件进行回弹值、碳化值和抗压强度值试验研究,得出了适用于河南地区回弹法检测混凝土强度的测强曲线。该曲线有效测强范围10~70 MPa,相较于现行国家规程中的统一测强曲线,回弹法测强范围得到提高,推定精度也得到有效提高,可为制定符合河南省回弹法测强曲线提供重要依据,同时为提高河南省非破损检测技术水平提供参考。 Study on the rebound value,carbonization value and compressive strength value of concrete specimens that the selected age for a period of 14 d,28 d,60 d,90 d,180 d and 365 d,it obtained the strength test curve is suitable for the detection of concrete strength by rebound method in Henan area,the curve of effective measuring range of 10 ~ 70 MPa,compared to the current national regulations in the unified strength test curve,measuring range rebound method is improved,the presumption of accuracy is greatly improved,can be formulated in accordance with the province rebound method provides an important basis for measuring curve,and to provide reference for improving the level of non damage detection technology in Henan province.
作者 管品武 郭靖 余政 侯力凯 GUAN Pinwu;GU0 Jing;YU Zheng;HOU Likai(College of Civil Engineering,Zhengzhou University,Zhengzhou 450001,China)
出处 《四川建筑科学研究》 2018年第6期1-7,共7页 Sichuan Building Science
关键词 回弹法 影响因素 试验研究 测强曲线 rebound method influence factor experimental study strength curve
  • 相关文献

参考文献3

二级参考文献36

  • 1刘汉勇,赵尚传,王建生.瓯江大桥混凝土回弹法专用测强曲线研究[J].土木工程学报,2015,48(1):41-48. 被引量:29
  • 2Topcu I B.Physical and mechanical properties of concretes produced with waste concrete[J].Cement and Concrete Research,1997,27(12):1817-1823.
  • 3U|usay R, Gokceog|u C, Su|ukcu S. Draft ISRM suggested method for determining block punch strength index (BPI). lnt J Rock Mech Min Sci 2001 ;38(8): 1113-20.
  • 4Aksoy CO, Ozacar V, Demirel N, Ozer SC, Safak S. Determination of instantaneous breaking .rate by geological strength index, block punch index, and power of impact hammer for various rock mass conditions. J Tunnel Undergr Space Technol 2011 ;26(4)'534-40.
  • 5ASTM. Standard test method for splitting tensile strength of intact rock core specimens. ASTM Stand D3967-08; 2008.
  • 6ASTM. Standard test method for determination of rock hardness by rebound Hammer method. ASTM Stand. D5873-00; 2005.
  • 7Sharma PK, Singh TN. A correlation between P-wave velocity, impact strength index, slake durability index, and uniaxial compressive strength. J Bull Eng Geol Environ 2008;67(1):17-22.
  • 8ASTM. Standard test method for laboratory determination of pulse velocities and ultrasonic elastic constants of rock. ASTM Stand. D2845-08; 2008.
  • 9Miller RP. Engineering classification and index properties for intact rock. Illinois: University of Illinois (Urbana-Champaign Campus); 1965.
  • 10Barton N, Choubey V. The shear strength of rock joints in theory and practice. Rock Mech 1977;10(1-2):1-54.

共引文献28

同被引文献40

引证文献5

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部