期刊文献+

含落角约束打击运动目标偏置比例制导律设计 被引量:5

Guidance With Constrained Impact Angle Against Moving Target Using Bias Proportional Guidance Law
下载PDF
导出
摘要 以打击地面运动目标为研究对象,提出了一种带落角约束的偏置相对比例制导律。利用弹目相对运动关系,将运动目标视为一个虚拟静止目标。进而,实际的制导指令可转化为虚拟制导指令,即相对飞行轨迹角变化速率的设计问题。再依据相对关系,采用瞬时变化及小角度假设推导得到了偏置指令项。通过要求相对飞行轨迹角速率与视线角成比例并包含一个附加偏置项,实际弹道倾角的约束控制可通过间接控制相对飞行轨迹角实现。由于所提制导方案需要剩余时间,推导得到了一种针对运动目标并考虑比例项和偏置项的剩余时间估计方法。仿真结果表明,该制导律可以对运动目标实现全向打击,并具有良好的制导性能。 A bias proportional guidance law with constrained impact angle was proposed,which was used to attack moving target.According to the relative motion of missile and target,the moving target was considered as a stationary virtual target.The actual guidance instruction can be transformed into virtual guidance instruction,namely the design problem of the relative flight path angle rate.Based on the relative relation,the instantaneous variation and small angle hypothesis was used to deduce the bias instruction item.The relative flight-trajectory-angle rate is proportional to the LOS angle and contains an additional bias item,and the constraint control for the actual trajectory angle can be indirectly realized by controlling relative flight-trajectory-angle.Due to the time-to-go required for the guidance scheme,a time-to-go estimation method for moving targets was derived considering proportional and bias terms.The simulation results show that the moving target can be omnidirectionally striked by the guidance law,and the guidance law has good performance.
作者 郝峰 王鹏飞 张栋 HAO Feng;WANG Pengfei;ZHANG Dong(School of Astronautics,Northwestern Polytechnical University,Xi’an710072,China;Aerospace Vehicle Laboratory,Northwestern Polytechnical University,Xi’an 710072,China;No.203Research Institute of Chinese Weaponry Industry,Xi’an710065,China)
出处 《弹道学报》 EI CSCD 北大核心 2018年第4期25-31,共7页 Journal of Ballistics
基金 国防基础科研项目(A0420132102)
关键词 导弹 落角约束 运动目标 偏置比例 missile constrained impact angle moving target bias proportional navigation
  • 相关文献

同被引文献52

引证文献5

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部