摘要
为克服五轴数控加工中忽略刀具姿态控制所带来的旋转轴速度和加速度不连续等问题,提出一种基于刀具姿态控制的五轴数控加工指令点插补算法。该算法根据给定的数控加工程序确定刀尖点位置集合和刀轴矢量集合,分别采用样条曲线对离散刀尖点和刀轴矢量进行拟合,得到刀尖点曲线和刀具姿态曲线,在此基础上进行指令点插补。实验结果表明,该算法能够将离散刀轴矢量拟合成位于单位球面的二阶连续曲线,保证旋转轴速度和加速度的连续性。
In order to avoid discontinuities of velocity and acceleration caused by overlooking tool posture control in five-axis CNC machining,an interpolation method based on tool posture control in five-axis CNC machining is proposed.Discrete tool tips and tool orientation vectors are obtained by machining programs.Spline curves are then used for fitting.Tool point curve and tool orientation curve are obtained respectively.Tool locations and orientation vectors are then obtained by interpolating the obtained curves.The experimental results show that the fitted tool orientation curve has the property of C2continuity and can ensure the continuity of speed and acceleration of rotation axes.
作者
耿聪
吴玉厚
韩旭
GENG Cong;WU Yu-hou;HAN Xu(National Engineering Laboratory of High-Grade Stone Material Numerical Control Machining Equipment and Technology,Shenyang Jianzhu University,Shenyang 110168,China;School of Mechanical Engineering,Shenyang Jianzhu University,Shenyang 110168,China;Shenyang Golding CNC Intelligent Technology Limited Company,Shenyang 110168,China)
出处
《组合机床与自动化加工技术》
北大核心
2018年第12期78-81,共4页
Modular Machine Tool & Automatic Manufacturing Technique
基金
国家科技重大专项(2013ZX04012-021)
辽宁省教育厅一般科学研究项目(L2015438)
重点实验室开放基金资助项目(SJSC-2015-08)
沈阳建筑大学学科涵育项目(XKHY2-27)
沈阳建筑大学博士后科研项目(SJZUBSH201612)
辽宁省自然科学基金指导计划(20180550160)
关键词
五轴加工
插补
旋转轴
刀轴矢量
five-axis CNC machining
interpolation
rotation axes
tool orientation
