摘要
以南方红豆杉叶为材料,在单因素试验的基础上,采用响应面分析法建立影响因素与响应值之间的数学模型,优化南方红豆杉叶中总黄酮超声辅助提取工艺条件。结果表明,最优提取条件为料液比1∶31(g/mL),提取时间57 min,乙醇浓度66%,超声辅助提取2次,南方红豆杉叶中总黄酮提取量为106.58 mg/g。该提取工艺稳定可行,适用于南方红豆杉叶中黄酮的提取。
The leaves of Taxus chinensis(Pilger)Rehd.were used as the material to extract total flavonoids,based on single factor experiments,a mathematical model between the influencing factors and the response values was established,extraction condition of total flavonoids with ultrasound-assisted extraction method was optimized by response surface methodology.The results showed that the optimum extraction conditions were as follows,the solid-liquid ratio was 1∶31(g/mL)the extraction time was 57 min,the volume fraction of ethanol was 66%,the ultrasound-assisted extraction was 2 times,the content of total flavonoids under the conditions was 106.58 mg/g.Therefore the extraction technology of total flavonoids from leaves of Taxus chinensis(Pilger)Rehd.was stable and applicable.
作者
王俊青
汪全
焦阳阳
李艳艳
WANG Jun-qing;WANG Quan;JIAO Yang-yang;LI Yan-yan(Pingdingshan University,Pingdingshan 467000,Henan, China)
出处
《食品研究与开发》
CAS
北大核心
2019年第2期86-90,共5页
Food Research and Development
基金
国家自然科学基金(31700597)
河南省高等学校重点科研项目(16A210035)
平顶山学院青年科研基金(PXYQNJJ2016018)
平顶山学院高层次人才科研启动基金(PXY-BSQD2016005)
平顶山学院2017年度国家级科研项目培育基金(PXY-PYJJ2017005)
关键词
南方红豆杉
黄酮
超声辅助提取
响应面分析
工艺
Taxus chinensis(Pilger)Rehd.flavonoid
ultrasound-assisted extraction
response surface methodology
process