摘要
针对卫星通信信道设备低功耗和数字化的需求,提出一种低功耗、数字化卫星调制解调平台的设计方法。前端通过AD9364完成模拟信号和数字信号的转换,后端采用大规模FPGA进行数字信号处理。测试结果表明,该调制解调平台通过加载不同的软件,可实现数据速率可变、调制解调方式可变、多种编译码方式、扩展L频段(950~2 150 MHz),大幅度降低了平台的体积和功耗,可作为一个成熟平台应用于卫星通信终端或便携站的产品设计中。
For the low power consumption and digital demand of satellite communication equipment,a design of low power digital satellite modulation-demodulation platform is proposed.The front end uses AD9364 to complete the transformation between analog signal and digital signal,and the back end adopts large-scale FPGA to perform digital signal processing.The test result shows that,by loading different software,the design of the modulation-demodulation platform can realize variable data rate,variable modulation and demodulation mode,expanded L band,and greatly reduce the platform size and power consumption,which can be used as a mature platform for the design of satellite communication terminal or portable station products.
作者
周士雷
韩刚
ZHOU Shilei;HAN Gang(The 54th Research Institute of CETC,Shijiazhuang 050081,China;Unit 91917,PLA,Beijing 102401,China)
出处
《无线电工程》
2019年第2期123-127,共5页
Radio Engineering
基金
国家高技术研究发展计划("863"计划)基金资助项目(2015AA015701)
关键词
小型化
调制
解调
数据速率可变
扩展L频段
miniaturization
modulation
demodulation
variable data rate
expanded L band