期刊文献+

不同回风口对空调室内机风道系统影响的研究 被引量:1

Study of Air Duct System of Indoor Air Conditioner with Different Return Air Inlet by Numerical Simulation
下载PDF
导出
摘要 空调器室内机回风口形式的不同对于风道系统有着较大的影响,通过建立相关模型,设置控制方程进行数值计算,得到了两种不同回风口下的空调器室内机风道系统的流场、压力场等,分析并阐述了不同回风口形式对风道系统的影响情况,为室内机风道系统的优化提供理论依据。 The type of return air inlet for air conditioner has great influence on the flow field of the air duct system. The simulation is presented by Fluent with relative equations after modelling. The flow distribution and pressure distribution of two types of different return air inlet are obtained. Based on the simulation results, the influence of the different type of return air inlet on the air duct system is analyzed. The work will provide the basis for putting forward the optimization methods for air duct system.
作者 刘起 Liu Qi(CRFSDI,Wuhan,430063)
出处 《制冷与空调(四川)》 2018年第6期623-626,635,共5页 Refrigeration and Air Conditioning
关键词 风道系统 CFD 回风口 空调 System of air duct CFD Return air inlet Air conditioner
  • 相关文献

参考文献7

二级参考文献16

  • 1游斌,吴克启.贯流风机变斜式叶轮和常规直叶轮的对比研究[J].工程热物理学报,2005,26(1):58-60. 被引量:27
  • 2邓明义,孟鸣,王军,吴克启.多折热交换器及其局部倒片降低空调室内机气动噪声的研究[J].流体机械,2001,29(10):58-60. 被引量:12
  • 3陈次昌.横流式风机内部流动的研究[J].农业机械学报,1995,26(4):90-94. 被引量:10
  • 4孙晓峰 周盛.气动声学[M].北京:国防工业出版社,1994..
  • 5B.埃克.通风机[M].北京:机械工业出版社,1983..
  • 6Toffolo A, Lazzaretto A, Martegani A D. An Experimental Investigation of the Flow Field Pattern Within the Impeller of a Cross-Flow Fan. Experimental Thermal and Fluid Science, 2004, 29:53-64
  • 7Cho Y, Moon Y J. Discrete Noise Prediction of Variable Pitch Cross-Flow Fans by Unsteady Navier-Stokes Computations. ASME J. Fluids Engineering, 2003, 125(3): 543-550
  • 8Klemm T, Gabi M. Using PIV and CFD to Investigate the Effect of Casing Design on Cross Flow Fan Performance. In: Proceeding of PSFVIP-4, Chamonix, France, 2003. 1-8
  • 9Yamafuji K. Studies on the Flow of Cross-Flow Impellers (lst Report, Experimental Study). Bull. JSME, 1975, 18(123): 1018-1025
  • 10[2]W.N.Dawes,P.C.Dhanasekaran,A.A.J.Demargne,W.P.Kellar,A.M.Savill.Reducing Bottlenecks in the CAD-to-Mesh-to-Solution Cycle Time to Allow CFD to Participate in Design.Journal of Turbomachinery,Transaction of ASME,July 2001,Vol.123 pp:552-557.

共引文献44

同被引文献11

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部