摘要
颗粒材料的宏观应力变形特征与其微观接触力、组构等紧密相关.一般而言,强接触系统属于颗粒内部体系的传力结构,其对应的组构张量是影响宏观应力性质的重要因素.细观数值方法 (如离散单元法)能够反映物理试验的基本规律,并且可以方便地提取宏微观数据来研究颗粒体系的应力变形机制.采用离散单元法(discrete element method, DEM)进行一系列等p等b应力路径下颗粒材料的真三轴试验,在此基础上研究了三维应力路径下颗粒材料的宏微观力学参数的演化过程、三维组构张量与应力张量多重联系以及强接触体系反映的宏观应力特征.研究表明:颗粒体系偏应力峰值状态和临界状态均存在与加载路径无关的宏微观特征;三维应力路径下组构张量与应力张量存在非共轴性,但其联合不变量演化过程表现出加载路径无关的特征;与弱接触系统的组构张量相比,强接触系统的组构张量更能反映宏观应力张量的特征;强弱接触体系的组构张量对颗粒体系宏观响应的贡献不同,其分界点存在一定取值范围,但采用平均接触力较为简单合理.
Macroscopic mechanical characteristics of granular materials are closely related to the microscopic contact force and fabric.Generally speaking,the strong contact system contributes to the force transmission of internal granular system,and then its corresponding fabric tensor has important influence on the macroscopic stress.Microscopic numerical methods,such as discrete element method,can reproduce the laboratory tests with reasonable macroscopic responses and extract macro-and micro-data conveniently for investigating the underlying mechanism of the granular system.Based on discrete element method(DEM),a series of true triaxial tests for granular materials under constant p and constant b stress paths are carried out,and the evolutions of macro-and micro-mechanical parameters of granular materials,the multiple relationship between three-dimensional fabric tensor and stress tensor and the macro-stress characteristics reflected by strong contact system are studied.The results demonstrate that some macro-and microscopic parameters at the stress peak and critical state in the granular system are independent on the loading path.Non-coaxiality between fabric tensor and stress tensor is observed under three-dimensional stress path,but the evolution of the joint invariant of the two tensors is independent on the 3D loading path.Compared to fabric tensor of weak contact system,the fabric tensor of strong contact system reflects better the characteristics of macroscopic stress tensor.Fabric tensors of strong and weak contact systems contribute di erently to the granular macroscopic response.To divide the strong and weak contact system,there is a range for the threshold,however adopting the average contact force is relatively simple and reasonable.
作者
刘嘉英
周伟
马刚
李易奥
刘其文
Liu Jiaying;Zhou Wei;Ma Gang;Li Yiao;Liu Qiwen(State Key Laboratory of Water Resources and Hydropower Engineering Science,Wuhan 430072,China;Guizhou Survey&Design Research Institute for Water Resources and Hydropower,Guiyang 550002,China)
出处
《力学学报》
EI
CSCD
北大核心
2019年第1期26-35,共10页
Chinese Journal of Theoretical and Applied Mechanics
基金
国家重点研发计划项目(2017YFC0404801)
国家自然科学基金项目(51579193)
贵州省科技重大专项(黔科合重大专项字[2017]3005-2号)资助
关键词
颗粒材料
离散元
三维应力路径
接触组构
强接触体系
granular materials
DEM
three-dimensional stress path
contact fabric
strong contact system