摘要
目的探讨应用三维(three dimensional,3D)打印技术构建心脏瓣膜病术前主动脉根部模型的可行性。方法前瞻性入选术前接受CT检查且拟行主动脉瓣置换术的患者8例,其中6例的主动脉疾病手术指征为主动脉瓣重度狭窄(2例合并主动脉瓣二叶式畸形),1例为人工生物瓣置入术后瓣膜失功能,1例为主动脉根部瘤合并主动脉瓣反流。CT扫描均使用前瞻性心电门控采集,将患者收缩期CT图像导入Mimics、3-matic、Magics、Freeform等医学三维图像建模及编辑软件,逐一进行疾病三维模型的构建,并打印出实物模型。结果 8例患者的主动脉疾病模型均成功构建,模型质量满意,有3例模型得到了手术验证。患者中位年龄为74岁(52~82岁),三维建模的中位耗时为4.5 h(3.0~5.5 h),3D打印的中位耗时为5 h(5~9 h),中位材料成本为3050元(2600~9700元)。结论应用3D打印技术构建心脏瓣膜病术前主动脉根部模型是可行的。
Objective To investigate the feasibility of three dimensional(3D)model printing of aortic root before aortic valve disease surgery.Methods Eight patients undergoing CT examination who would undergone cardiac aortic valve replacement were prospectively enrolled.Six patients’aortic disease indicated for severe aortic stenosis(two patients were with bicuspid aortic valve deformity),one patient was with artificial bioprosthetic valve dysfunction after implantation,one patient was with main artery root aneurysm and aortic regurgitation.Prospective ECG gated acquisition was used for CT scan.The CT images of systolic were imported into Mimics■、3-matic、Magics■、Freeform■and other 3D modeling and editing software,then the 3D models of disease were built one by one,and physical models were printed.Results Models of aortic valve disease of all eight cases were successfully constructed,with good qualities,three of which were confirmed by open surgery.The median age was 74 years(the age range of 52-82 years).The median time cost of three-dimensional modeling was 4.5 hours(the time range of 3.0-5.5 hours),and the median time cost of 3D model printing was 5 hours(the time range of 5-9 hours),and the median material cost was¥3050(the cost range of¥2600-9700).Conclusions 3D model printing of aortic valve disease before operation is feasible.
作者
马连彩
刘坤
张茗卉
崔跃
张宝祥
李君涛
吕滨
MA Liancai;LIU Kun;ZHANG Minghui;CUI Yue;ZHANG Baoxiang;LI Juntao;LYU Bin(GRIMED Medical (Beijing) Co.,Ltd.,Beijing 102299;Hepatobiliary and PancreaticSpleen Surgery,First Affiliated Hospital of PLA General Hospital,Beijing 100048;Ultrasound Diagnostic Center,Fuwai Hospital,Chinese Academy of Medical Sciences,Chinese Academy of Medical Sciences,Beijing Union Medical College,Beijing 100037)
出处
《北京生物医学工程》
2019年第1期7-14,66,共9页
Beijing Biomedical Engineering
关键词
计算机断层成像
主动脉瓣病
经心尖主动脉瓣置换术
三维打印
computed tomography
aortic valve disease
trans-apical aortic valve implantation
three dimensional printing