期刊文献+

基于调磁块阵列的永磁游标电机研究 被引量:8

Study of Permanent Magnet Vernier Machine by Using Magnetic Tuning Block Array
下载PDF
导出
摘要 首先根据磁导调制原理,建立基于调磁块阵列的永磁游标电机(PMVM)的数学模型;并运用解析及有限元方法分析关键参数对电机性能的影响,给出具体的优化方案;最后设计了一台基于调磁块阵列的PMVM。与传统永磁电机相比,所设计的基于调磁块阵列的PMVM具有转矩密度高、功率密度高等优点。本文为基于调磁块阵列的永磁游标电机的设计与应用提供了理论依据。 This paper establishes the mathematical model of permanent magnet vernier machine(PMVM)based on magnetic tuning block array under the principle of magnetic permeability modulation.Through theoretical derivation and finite element analysis,the influence of several key parameters on its performance was determined.And gives the optimized method.Finally,design a PMVM based on tuning block array,and compare it with a traditional permanent magnet synchronous motor(PMSM).The analysis results show that PMVM based on tuning block array presented in this paper has advantages of high torque density and so on.The work done in this paper also provides a theoretical basis for this kind of PMVM design and application.
作者 李岱岩 白保东 杨晨 陈德志 Li Daiyan;Bai Baodong;Yang Chen;Chen Dezhi(School of Electrical Engineering Shenyang University of Technology Shenyang 110870 China)
出处 《电工技术学报》 EI CSCD 北大核心 2018年第A02期359-366,共8页 Transactions of China Electrotechnical Society
关键词 磁导调制 数学模型 永磁游标电机 转矩密度 Magnetic modulation mathematical model permanent magnet vernier machine torque density
  • 相关文献

参考文献3

二级参考文献42

  • 1王继强,王凤翔,鲍文博,关恩录.高速永磁电机转子设计与强度分析[J].中国电机工程学报,2005,25(15):140-145. 被引量:96
  • 2李春艳,褚佳明.直线感应电动机定子线圈端部灌封树脂工艺[J].防爆电机,2005,40(6):44-45. 被引量:3
  • 3王凤翔.高速电机的设计特点及相关技术研究[J].沈阳工业大学学报,2006,28(3):258-264. 被引量:169
  • 4孙宜标,金石,王成元.直接驱动环形永磁力矩电机μ-H_∞速度控制器设计[J].中国电机工程学报,2007,27(3):35-39. 被引量:12
  • 5Gerada C, Bradley K, Whitley C, et al. High torque density PM machines for high performance operation[C]. The 33rd Annual Conference of the IEEE on Industrial Electronics Society, 2007: 210-215.
  • 6Bianchi N, Bolognani S, Frare P. Design criteria for high-efficiency SPM synchronous motors[J]. IEEE Transactions on Energy Conversion, 2006, 21(2): 396-404.
  • 7Bogusz P, Korkosz M, Prokop J A. Study of design process of BLDC motor for aircraft hybrid drive[C]. IEEE International Symposium on Industrial Electronics, 2011: 508-513.
  • 8Wang J B, Atallah K, Zhu Z Q, et al. Modular three-phase permanent-magnet brushless machines for in-wheel applications[J]. IEEE Transactions on Vehicular Technology, 2008, 57(5): 2714-2720.
  • 9Hwang C C, Cheng S P, Chang C M. Design of high-performance spindle motors with concentrated windings[J].IEEE Transactions on Magnetics, 2005, 41(2): 971-973.
  • 10Qu R H, Lipo T A. Analysis and modeling of air gap & zigzag leakage fluxes in a surface mounted-PM machine[J]. IEEE Transactions on Industry Applications, 2004, 40(1): 121-127.

共引文献89

同被引文献46

引证文献8

二级引证文献63

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部