摘要
在现有的花生播种机基础上,根据垄作播种的要求,设计了2BMD-3/6型花生膜上穴播机,集起垄、施肥、喷药、铺膜及播种等于一体,操作简单,调整方便,且采用了仿形机构,能够提高播种机对垄面的适应性。试验结果表明:在功率损耗几乎不增加的情况下,播种行数增多,播种效率大幅提高;采用穴播轮实现了膜上打孔播种,不需要后续的人工开孔,减少了劳动强度,降低了用工成本。
On the basis of the existing peanut planter,and according to the requirements of ridge tillage planting design of 2 BMD-3/6 type peanut membrane punch planter,ridging,applying fertilizer,spraying,membrane,sowing,simple operation,easy to adjust,and used the profiling mechanism,can improve the planter of adaptability of ridge surface;Almost no increase in power consumption,increased planting rows,sowing efficiency is greatly increased,and the membrane is realized by using dibbling wheel punch planting,does not require subsequent artificial hole,reduces the labor intensity,reduce the labor costs.
作者
刘晓东
王东伟
何晓宁
苏鑫
蒋爽
张宁
万恩超
Liu Xiaodong;Wang Dongwei;He Xiaoning;Su Xin;Jiang Shuang;Zhang Ning;Wan Enchao(College of Mechanical and Electrical Engineering,Qingdao Agricultural University,Qingdao 266109,China)
出处
《农机化研究》
北大核心
2019年第7期90-94,共5页
Journal of Agricultural Mechanization Research
基金
山东省农机装备研发创新计划项目(2016YF033)
关键词
穴播机
膜上打孔
播种
花生
sowing machine
film drilling
sowing
peanut
