期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

Development of gas tungsten arc welding using current pulsing technique to preclude chromium carbide precipitation in aerospace-grade alloy 80A 被引量：1

Development of gas tungsten arc welding using current pulsing technique to preclude chromium carbide precipitation in aerospace-grade alloy 80A
下载PDF
导出
摘要 Weldments were produced using gas tungsten arc welding(GTAW) and pulsed current gas tungsten arc welding(PCGTAW) techniques with ERNiCr-3 filler wire. Macro examination revealed that the resultant weldments were free from defects. A refined microstructure was observed in the weldment fabricated through PCGTAW. Scanning electron microscopy(SEM) analysis revealed secondary phases in the grain boundaries. Energy-dispersive X-ray spectroscopy(EDS) analysis revealed that microsegregation of Cr carbide precipitates was completely eradicated through PCGTAW. The microsegregation of Nb precipitates was observed in the GTA and PCGTA weldments. X-ray diffraction(XRD) analysis revealed the existence of M_(23)C?_6 Cr-rich carbide and Ni_8Nb phases in the GTA weldments. By contrast, in the PCGTA weldments, the Ni_8Nb phase was observed. The Cr_2Ti phase was observed in both the GTA and the PCGTA weldments. Tensile tests showed that the strength and ductility of the PCGTA weldments were slightly higher than those of the GTA weldments. Weldments were produced using gas tungsten arc welding(GTAW) and pulsed current gas tungsten arc welding(PCGTAW) techniques with ERNiCr-3 filler wire. Macro examination revealed that the resultant weldments were free from defects. A refined microstructure was observed in the weldment fabricated through PCGTAW. Scanning electron microscopy(SEM) analysis revealed secondary phases in the grain boundaries. Energy-dispersive X-ray spectroscopy(EDS) analysis revealed that microsegregation of Cr carbide precipitates was completely eradicated through PCGTAW. The microsegregation of Nb precipitates was observed in the GTA and PCGTA weldments. X-ray diffraction(XRD) analysis revealed the existence of M_(23)C?_6 Cr-rich carbide and Ni_8Nb phases in the GTA weldments. By contrast, in the PCGTA weldments, the Ni_8Nb phase was observed. The Cr_2Ti phase was observed in both the GTA and the PCGTA weldments. Tensile tests showed that the strength and ductility of the PCGTA weldments were slightly higher than those of the GTA weldments.
作者 P.Subramani M.Manikandan
机构地区 School of Mechanical Engineering
出处 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2019年第2期210-221,共12页 矿物冶金与材料学报（英文版）
关键词 NI-BASED SUPERALLOY welding pulse CURRENT MICROSEGREGATION CHROMIUM CARBIDE Ni-based superalloy welding pulse current microsegregation chromium carbide
分类号 TF [冶金工程]
  • 相关文献

参考文献2

二级参考文献38

  • 1D. Maisonnette, M. Suery, D. Nelias, P. Chaudet, and T. Epicier, Effects of heat treatments on the microstruc- ture and mechanical properties of a 6061 aluminium alloy, Mater. Sci. Eng. A, 528(2011), No. 6, p. 2718.
  • 2D. Halil and G. Siileyman, The effects of aging on machin- ability of 6061 aluminium alloy, Mater. Des., 30(2009), No. 5. D. 1480.
  • 3M.I. Khan, Welding Science and Technology, New Age In- ternational, Lucknow, 2008, p. 42.
  • 4M. Temmar, M. Hadji, and T. Sahraoui, Effect of post- weld aging treatment on mechanical properties of tungsten inert gas welded low thickness 7075 aluminium alloy joints, Mater. Des., 32(2011), No. 6, p. 3532.
  • 5V. Balasubramanian, V. Ravisankar, and G.M. Reddy, Ef- fect of pulsed current and post weld aging treatment on tensile properties of argon arc welded high strength alu- minum alloy, Mater. Sci. Eng. A, 459(2007), No. 1-2, p. 19.
  • 6S. Malarvizhi and V. Balasubramanian, Effects of weld- ing processes and post-weld aging treatment on fatigue be- havior of AA2219 aluminum alloy joints, J. Mater. Eng. Perform., 20(2011), No. 3, p. 359.
  • 7S. Kou, Welding Metallurgy, 2nd Ed., John Wiley &= Sons, New Jersey, 2003, p. 304.
  • 8T. Oppenheim, S. Tewfic, T. Scheck, V. Klee, S. Lomeli, W. Dahir, P. Youngren, N. Aizpuru, l~. Clark Jr., E.W. Lee, J. Ogren, and O.S. Es-Said, On the correlation of me- chanical and physical properties of 6061-T6 and 7249-T76 aluminum alloys, Eng. Fail. Anal., 14(2007), No. 1, p. 218.
  • 9H. Agarwal, A.M. Gokhale, S. Graham, and M.F. Horste-meyer, Void growth in 6061-aluminum alloy under triaxial stress state, Mater. Sei. Eng. A, 341(2003), No. 1-2, p. 35.
  • 10Z. Nikseresht, F. Karimzadeh, M.A. Golozar, and M. Hei- darbeigy, Effect of heat treatment on microstructure and corrosion behavior of A16061 alloy weldment, Mater. Des., 31(2010), No. 5, p. 2643.

共引文献15

同被引文献17

引证文献1

二级引证文献7

International Journal of Minerals,Metallurgy and Materials
2019年 第2期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部