期刊文献+

基于无迹卡尔曼滤波与遗传算法相结合的车辆状态估计 被引量:15

Vehicle State Estimation Based on the Combination of Unscented Kalman Filtering and Genetic Algorithm
下载PDF
导出
摘要 针对汽车状态估计中过程噪声和量测噪声统计特性不确定的状况,通过UKF算法与遗传算法相结合,提出一种新的自适应滤波算法,以降低噪声对估计结果的干扰。为达到较高的精度,建立了7自由度非线性车辆动力学模型,结合"魔术公式"轮胎模型对汽车行驶过程中的纵、侧向速度、轮胎力和质心侧偏角分别进行了估计。在利用UKF对汽车状态参数进行估计的同时,引入遗传算法,根据适应度函数对过程噪声和量测噪声进行寻优,实现了噪声的自适应作用,估计精度大幅提高。仿真和道路模拟试验的结果表明,UKF结合遗传算法的方法,能提高估计精度且具有很好的抗干扰性。 In view of the uncertain situation of the statistical characteristics of process noise and measurement noise in vehicle state estimation, a new adaptive filtering algorithm is put forward by combining UKF algorithm with genetic one for reducing the disturbance of noise to the results of estimation. In order to achieve higher accuracy, a 7 DOF nonlinear vehicle dynamics model is established and by combining ‘magic formula’ tire model, the longitudinal and lateral velocities, tire force and the sideslip angle of mass center are estimated respectively. While UKF algorithm is applied to estimate vehicle states, the genetic algorithm is introduced, and the process noise and measurement noise are optimized based on fitness function to realize the adaptation of noise with the accuracy of estimation greatly enhanced. The results of simulation and road test show that the combination of UKF and genetic algorithms can improve the accuracy of vehicle state estimation with good disturbance resistance.
作者 周卫琪 齐翔 陈龙 徐兴 Zhou Weiqi;Qi Xiang;Chen Long;Xu Xing(School of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013;Automotive Engineering Research Institute, Jiangsu University, Zhenjiang 212013)
出处 《汽车工程》 EI CSCD 北大核心 2019年第2期198-205,共8页 Automotive Engineering
基金 国家自然科学基金(U1564201) 江苏省"六大人才高峰"项目(2015-ZBZZ-041) 江苏省高校自然科学研究项目(15KJB460006) 江苏大学高级人才启动项目(14JDG179)资助
关键词 车辆 状态估计 UKF算法 遗传算法 魔术公式 vehicle state estimation UKF algorithm genetic algorithm magic formula
  • 相关文献

参考文献10

二级参考文献262

共引文献415

同被引文献120

引证文献15

二级引证文献42

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部